Welded joints characterization of UNS N06626 alloy components manufactured using Direct Metal Laser Sintering (DMLS)

被引：0
|
作者：
Bianco, Antonio [1 ]
Moglia, Roberta [1 ]
Murgia, Michele [1 ]
Sabbione, Piero [1 ]
机构：
[1] IIS PROGRESS srl, Genova, Italy
来源：
Rivista Italiana della Saldatura | 2016年 / 68卷 / 03期
关键词：
Laser heating - Nondestructive examination - Niobium alloys - Chromium alloys - Sintering - Welding;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This article summarizes the test results ofGTA welded joints characterization conducted by IIS between semi-finished products obtained by Direct Metal Laser Sintering (DMLS) andNi-Cr-Nb UNS N06626 rolled alloy. The growing circulation of these innovative manufacturing technologies and the high interest in some industrial sectors leads inevitably to understanding the properties of these semi-finished products: Among these properties, there is no doubt that weld- Ability plays a major role, in consideration of their different metallurgical and microstructural characteristics. Non-destructive testing and destructive testing were conducted on the welded test pieces, in comparison with the parent material, to get useful elements for the jonts charac-terization and for their in service performances.
引用
收藏
页码：303 / 312
相关论文
共 40 条
  • [21] Investigation of electrochemical post-processing procedure for Ti-6Al-4V lattice structure manufactured by direct metal laser sintering (DMLS)
    Guoying Dong
    Julien Marleau-Finley
    Yaoyao Fiona Zhao
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 3401 - 3417
  • [22] Investigation of electrochemical post-processing procedure for Ti-6Al-4V lattice structure manufactured by direct metal laser sintering (DMLS)
    Dong, Guoying
    Marleau-Finley, Julien
    Zhao, Yaoyao Fiona
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (9-12): : 3401 - 3417
  • [23] Production and analysis of additively manufactured SS316L using Direct Metal Laser Sintering (DMLS) technique based on hybrid Taguchi-Grey grade relational analysis
    Sivaraj, L.
    Muralidharan, N.
    Kalaiselvan, K.
    Karthikeyan, A. G.
    JOURNAL OF MANUFACTURING PROCESSES, 2025, 141 : 976 - 990
  • [24] Structural characterization of biomedical Co-Cr-Mo components produced by direct metal laser sintering
    Barucca, G.
    Santecchia, E.
    Majni, G.
    Girardin, E.
    Bassoli, E.
    Denti, L.
    Gatto, A.
    Iuliano, L.
    Moskalewicz, T.
    Mengucci, P.
    MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2015, 48 : 263 - 269
  • [25] COMPARATIVE ANALYSIS OF PROPERTIES AND MICROSTRUCTURE OF THE PLASTICALLY DEFORMED ALLOY INCONEL®718, MANUFACTURED BY PLASTIC WORKING AND DIRECT METAL LASER SINTERING
    Zaba, K.
    Puchlerska, S.
    Kwiatkowski, M.
    Nowosielski, M.
    Glodzik, M.
    Tokarski, T.
    Seibt, P.
    ARCHIVES OF METALLURGY AND MATERIALS, 2016, 61 (01) : 143 - 147
  • [26] From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
    Manfredi, Diego
    Calignano, Flaviana
    Krishnan, Manickavasagam
    Canali, Riccardo
    Ambrosio, Elisa Paola
    Atzeni, Eleonora
    MATERIALS, 2013, 6 (03): : 856 - 869
  • [27] THE GEOMETRICAL ACCURACY OF A CUSTOM ARTIFICIAL INTERVERTEBRAL DISC IMPLANT MANUFACTURED USING COMPUTED TOMOGRAPHY AND DIRECT METAL LASER SINTERING
    De Beer, N.
    Odendaal, A. I.
    JOURNAL FOR NEW GENERATION SCIENCES, 2012, 10 (03) : 1 - 13
  • [28] Compressive performance of an arbitrary stiffness matched anatomical Ti64 implant manufactured using Direct Metal Laser Sintering
    Vance, Aaron
    Bari, Klaudio
    Arjunan, Arun
    MATERIALS & DESIGN, 2018, 160 : 1281 - 1294
  • [29] Effect of TiB2 addition on the microstructure and wear resistance of Ti-6Al-4V alloy fabricated through direct metal laser sintering (DMLS)
    Patil, Aniruddha S.
    Hiwarkar, Vijay D.
    Verma, Pankaj K.
    Khatirkar, Rajesh K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 777 : 165 - 173
  • [30] Performance analysis of EDM electrode manufactured by direct metal laser sintering during machining of titanium alloy (Ti6Al4V)
    Sahu, Anshuman Kumar
    Mahapatra, Siba Sankar
    MACHINING SCIENCE AND TECHNOLOGY, 2023, 26 (05) : 858 - 893
1234