Transformation of non-metal inclusions in ultra-low oxygen wheel steel during refining process

被引：0
|
作者：
Yang, Jun [1 ]
Wang, Xin-Hua [1 ]
Wang, Wan-Jun [1 ]
Gong, Zhi-Xiang [2 ]
Wang, Guo-Cai [2 ]
Tang, Yu [1 ]
机构：
[1] School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083, China
[2] Technology Center of Ma'anshan Iron and Steel Company Limited, Ma'anshan 243011, China
来源：
Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing | 2010年 / 32卷 / 07期
关键词：
Wheels - Slags - Steelmaking - Refining - Alumina - Aluminum oxide - Hot working;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The formation and transformation of inclusions in high speed wheel steel during refining were studied in ultra-low oxygen steelmaking by LD-LF-VD-CC process. Sufficient aluminium was added to the experimental steel for final deoxidation during tapping, and refining slag with strong deoxidation, high basicity and strong reducibility was used during LF refining. The results show that the casting blanks are of high cleanliness and the total oxygen is only 7 × 10-6. Oxide inclusions in the experimental steel have finished the transformation of Al2O3 → MgO · Al2O3 spinel → CaO-MgO-Al2O3 complex inclusions during LF refining, and the complex oxide inclusions obtained are liquid and easy to remove by collision, coalescence and flotation at steelmaking temperature. Residual oxide inclusions in the steel are CaO-MgO-Al2O3 system complex inclusions with a relatively lower melting point, which have a little deformability during hot-working and can improve the fatigue properties of high speed wheel steel effectively. ©.
引用
收藏
页码：860 / 865
相关论文
共 50 条
  • [41] Texture evolution during recrystallization of ultra-low carbon steel
    Lindh, E.
    Hutchinson, B.
    Bate, P.
    Materials Science Forum, 1994, 157-6 (pt 1) : 997 - 1002
  • [42] Microstructure transformation and brittlement of a ultra-low carbon QT steel during double welding thermal cycle
    Gao, HL
    Dong, YH
    Hendricks, RW
    ACTA METALLURGICA SINICA, 2001, 37 (01) : 34 - 38
  • [43] Formation of Non-metallic Inclusions of Si-killed Stainless Steel during GOR Refining Process
    Li, Liu-yi
    Cheng, Guo-guang
    Hu, Bin
    Wang, Cheng-shun
    Qian, Guo-yu
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2018, 37 (06) : 521 - 529
  • [44] A novel electrochemical oxygen sensor for determination of ultra-low oxygen contents in molten metal
    Sun, JL
    Jin, CJ
    Li, LS
    Hong, YR
    JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2001, 8 (02): : 137 - 140
  • [45] Continuous cooling transformation of ultra-low carbon microalloyed steel after deformation
    Kong, Jun-Hua
    Liu, Chang-Ming
    Zheng, Lin
    Guo, Bin
    Liu, Xiao-Guo
    Xie, Chang-Sheng
    Jinshu Rechuli/Heat Treatment of Metals, 2004, 29 (11):
  • [46] Influence of process conditions during Ruhrstahl-Hereaeus refining process and effect of vacuum degassing on carbon removal to ultra-low levels
    Li, Y. -H.
    Bao, Y. -P.
    Wang, M.
    Wang, R.
    Tang, D. -C.
    IRONMAKING & STEELMAKING, 2015, 42 (05) : 366 - 372
  • [47] The evolution and behavior of the non-metallic inclusions during the RH refining process
    School of Materials and Metallurgy, Northeastern University, Shenyang 110819, China
    Dongbei Daxue Xuebao, 3 (373-377):
  • [48] Influence of Inclusions on Early Corrosion Development of Ultra-Low Carbon Bainitic Steel in NaCl Solution
    Wei, J.
    Dong, J. H.
    Ke, W.
    He, X. Y.
    CORROSION, 2015, 71 (12) : 1467 - 1480
  • [49] Research on the trajectory of non-metal inclusions with the flow in the mold during the solidification of continuous casting slabs
    LIU Xufeng
    BaosteelTechnicalResearch, 2011, 5 (01) : 51 - 55
  • [50] Evolution Mechanism of Non-metallic Inclusions in Al-Killed Alloyed Steel during Secondary Refining Process
    Deng, Zhiyin
    Zhu, Miaoyong
    ISIJ INTERNATIONAL, 2013, 53 (03) : 450 - 458
12345