Parameter-normalized probabilistic seismic demand model considering the structural design strength for structural response assessment

The Probabilistic Seismic Demand Model (PSDM) is a crucial component of the performance-based seismic design framework when establishing the relationship between the ground motion intensity measure (IM) and the engineering demand parameter (EDP). The definitions of IMs and EDPs introduce varying degrees of uncertainty into the PSDM and notes different fragility or hazard analysis results. In accordance with the elastic limit state of the structural seismic response, this study normalizes two key parameters, the IM and EDP, within the PSDM. Normalized EDP (EDPN) is the ratio of the structural response to the elastic limit state of the structure, as defined by the onset of the strength yielding of the main structural element. Similarly, the IM (IMN) is normalized based on corresponding ground motions (scaled) that cause the structure to offer an elastic limit state response. This means that structural design strength is considered in IM N following the construction of a parameter-normalized PSDM. The study examined two typical isolated bridges presented their hazard curves with IM N . The results show that IM N can unify the efficiency and sufficiency of different IMs and reduce uncertainty in the PSDM. The assessment error of the structural elastic limit state for its design strength had little effect on the parameter- normalized PSDM, so the model is robust. Additionally, the IM N outperformed traditional IMs for efficiency and sufficiency in most instances.