Experimental study on the weld fracture behavior of high strength steel beam-to-column connections

被引：0
|
作者：
Liu X.-Y. [1 ,2 ]
Wang Y.-Q. [2 ]
Shi Y.-J. [2 ]
Tan Q.-H. [1 ]
机构：
[1] College of Basic Education for Commanding Officers, National University of Defense Technology, Changsha
[2] Department of Civil Engineering, Tsinghua University, Beijing
来源：
Wang, Yuan-Qing (wang-yq@mail.tsinghua.edu.cn) | 2018年 / Tsinghua University卷 / 35期
关键词：
Connection; Experimental study; Fracture behavior; High strength steel; Welded joint;
D O I：
10.6052/j.issn.1000-4750.2016.11.0885
中图分类号：
学科分类号：
摘要：
To investigate the fracture behavior of high strength steel (HSS) welded joints in practical engineering, 20 typical HSS cruciform welded joints that represent the local weld regions of practical beam-to-column connections were tested under monotonic and cyclic loading. Two weld types, that is, the complete penetration butt welded joint and fillet welded joint, were adopted. The fracture mechanisms of HSS welded joints were investigated. The effects of weld type, load type and steel strength on the fracture behavior of HSS welded joints were analyzed. The results indicate that the weld type has a large effect on the fracture behavior of welded joints. The tension-unloading effects result in material damage and cracks in the heat affected zone. The HSS welded joints are more prone to fracture failure under cyclic loading of larger ranges. The fracture loads and elongations of the tested coupons were obtained, which can provide basis for developing fracture prediction model of welds in HSS connections. © 2018, Engineering Mechanics Press. All right reserved.
引用
收藏
页码：54 / 64
页数：10
相关论文
共 17 条
  • [11] Huang Y.H., Onishi Y., Hayashi K., Inelastic behavior of high strength steels with weld connections under cyclic gradient stress, Proceeding of the 11th World Conference on Earthquake Engineering, (1996)
  • [12] Herion S., Hrabowski J., Ummenhofer T., Low-cycle fatigue behaviour of high-strength steel butt welds, Proceedings of the Twenty-first (2011) International Offshore and Polar Engineering Conference, pp. 282-287, (2011)
  • [13] Wang Y., Liu X., Shi Y., The fracture toughness of butt weld at low temperature of 960 MPa high-strength steel, Chinese Journal of Materials Research, 27, 3, pp. 237-246, (2013)
  • [14] Wang Y., Liu X., Shi Y., Experimental study on impact toughness of 960 MPa high-strength steel and its butt weld at low temperature, Journal of Building Materials, 17, 5, pp. 915-919, (2014)
  • [15] Shi G., Wang F., Dai G., Wang Y., Shi Y., Cyclic loading test on welded connection of high strength steel Q460C, Journal of Building Structures, 33, 3, pp. 15-21, (2012)
  • [16] Shi G., Wang F., Dai G., Cyclic loading tests on high strength structural steel Q460C, Journal of Southeast University, 41, 6, pp. 1259-1265, (2011)
  • [17] Xiong J., Research on the damage behavior and calculation model of welded connections in steel frames under earthquakes, (2011)
12