The simulation of roll forming with multiple passes

被引：0
|
作者：
Zeng, Guo [1 ]
Lai, Xin-Min [1 ]
Yu, Zhong-Qi [1 ]
Guo, Yong-Jin [1 ]
机构：
[1] School of Mechanical Eng., Shanghai Jiaotong Univ., Shanghai 200240, China
来源：
Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2007年 / 41卷 / 10期
关键词：
ABAQUS - Algorithms - Boundary conditions - Deformation - Finite element method - Rolls (machine components) - Sheet metal;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The deformation of roll forming is very complicated and shows obvious material nonlinearity, geometric nonlinearity and boundary nonlinearity. The simulation of roll forming with multiple passes was studied by FEM software ABAQUS. Based on dynamic explicit algorithm and using approach that the metal sheet is pulled by leading sheet, an FE model of roll forming with multiple passes is set up. The key problems in the model, model construction, choosing element, boundary condition, virtual speed of metal sheet, loading amplitude and springback are discussed, and a simulation method for roll forming with multiple passes is proposed. The method is validated with roll forming process with 12 passes of channel section with outer edge.
引用
收藏
页码：1598 / 1602
相关论文
共 50 条
  • [21] Roll forming simulation using finite element analysis
    Armstrong World Industries, Lancaster, United States
    Manuf Rev, 2 (114-119):
  • [22] Modeling of the process of rolling in roll passes
    Chumachenko, EN
    Mashkova, NN
    Cherednikov, VA
    Tulupov, SA
    STEEL IN TRANSLATION, 1996, 26 (11) : 60 - 66
  • [23] Analytic description of roll passes' profile
    Rozhdestvenskii, YV
    Lyakhov, AL
    STEEL IN TRANSLATION, 1997, 27 (01) : 59 - 62
  • [24] Development of a Method for the Visualization of the Process of Forming of Curved Profiles in the Software Used for the Numerical Analyses of the Roll Passes
    V. A. Osadchii
    S. M. Gorbatyuk
    D. I. Filippov
    N. S. Kuprienko
    Metallurgist, 2019, 63 : 658 - 664
  • [25] Numerical Investigation about the Effect of Increasing the Number of Forming Passes on the Quality of AHSS Roll Formed Products
    Badr, Ossama Mamdouh
    Rolfe, Bernard
    Hodgson, Peter
    Weiss, Matthias
    NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 2013, 1567 : 872 - 875
  • [26] Development of a Method for the Visualization of the Process of Forming of Curved Profiles in the Software Used for the Numerical Analyses of the Roll Passes
    Osadchii, V. A.
    Gorbatyuk, S. M.
    Filippov, D., I
    Kuprienko, N. S.
    METALLURGIST, 2019, 63 (5-6) : 658 - 664
  • [27] Simulation and Experimental Study on Roll-Forming Limit of Cup
    Zhang, Baohong
    Ning, Shengpeng
    Wei, Zeng
    Duan, Yali
    Li, Xubin
    Yang, Yongbiao
    MATERIALS, 2022, 15 (04)
  • [28] Simulation of roll forming with dynamic explicit finite element method
    Yin, JL
    Luo, YB
    Li, DY
    Peng, YH
    Numisheet 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Pts A and B, 2005, 778 : 197 - 200
  • [29] Simulation of roll-forming process with a specific FEM code
    Brunet, M
    Mguil, S
    Idrissi-Ronel, S
    Pol, P
    SIMULATION OF MATERIALS PROCESSING: THEORY, METHODS AND APPLICATIONS, 1998, : 941 - 946
  • [30] Numerical simulation of the component microstructure change through roll forming
    Hu, Z. Q.
    Cheng, K.
    Feng, Z. M.
    PROCEEDINGS OF THE 18TH INTERNATIONAL CONFERENCE ON AUTOMATION AND COMPUTING (ICAC 12), 2012, : 254 - 258
12345