The simulation of roll forming with multiple passes

被引：0

作者：

Zeng, Guo ^{[1
]}

Lai, Xin-Min ^{[1
]}

Yu, Zhong-Qi ^{[1
]}

Guo, Yong-Jin ^{[1
]}

机构：

[1] School of Mechanical Eng., Shanghai Jiaotong Univ., Shanghai 200240, China

来源：

Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University | 2007年 / 41卷 / 10期

关键词：

ABAQUS - Algorithms - Boundary conditions - Deformation - Finite element method - Rolls (machine components) - Sheet metal;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The deformation of roll forming is very complicated and shows obvious material nonlinearity, geometric nonlinearity and boundary nonlinearity. The simulation of roll forming with multiple passes was studied by FEM software ABAQUS. Based on dynamic explicit algorithm and using approach that the metal sheet is pulled by leading sheet, an FE model of roll forming with multiple passes is set up. The key problems in the model, model construction, choosing element, boundary condition, virtual speed of metal sheet, loading amplitude and springback are discussed, and a simulation method for roll forming with multiple passes is proposed. The method is validated with roll forming process with 12 passes of channel section with outer edge.

引用

页码：1598 / 1602

共 50 条

[1] Mathematical Simulation of the Forming of a Round Welded Steel Tube into a Square Profile in Four-Roll Passes
Akopyan, K. E.
Kolobov, A. V.
Rodichev, D. A.
Seleznev, M. S.
Trusov, V. S.
Fedotov, E. S.
Yusupov, V. S.
RUSSIAN METALLURGY, 2012, 2012 (05): : 375 - 379
[2] LIMITING ROLLING RATES IN MULTIPLE-ROLL PASSES
BARKOV, LA
VYDRIN, VN
STEEL IN THE USSR, 1973, 3 (03): : 220 - 221
[3] The effect of forming passes on the springback and microstructure of magnesium alloy sheets in roll bending
Wang, Rongjun
Xue, Sensen
Zhou, Weiguang
Wang, Xiaocong
Zhang, Pengchong
Wang, Jianhua
Yan, Yan
Meng, Zhijuan
MATERIALS TODAY COMMUNICATIONS, 2025, 42
[4] Study on roll forming process simulation and roll diameters optimization
Li, Da-Yong
Jiang, Jin-Mao
Peng, Ying-Hong
Yin, Ji-Long
Xitong Fangzhen Xuebao / Journal of System Simulation, 2007, 19 (04): : 893 - 896
[5] Influence of varying static characteristics of roll forming passes on profile geometry and reproduction processes
Leonhartsberger, Martin
Lamprecht, Matthias
Famler, Stephan
Krall, Stephan
Bleicher, Friedrich
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2023, 40 : 180 - 198
[6] Numeral Simulation of a New Forming Process: Stretch Forming Combined with Roll Forming
Hu, Zhiqing
Zhao, Ji
Deng, Yushan
Zhang, Haohan
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 2399 - +
[7] LONGITUDINAL THICKNESS VARIATION DURING COLD ROLLING IN MULTIPLE-ROLL PASSES
NIKIFOROV, VA
SHOKHIN, VV
SKOROKHODOV, NE
POLYAKOV, MG
SELIVANOV, IA
STEEL IN THE USSR, 1976, 6 (09): : 510 - 511
[8] Integrated system of numerical simulation and roll pass CAD for cold roll forming
Han, Zhiwu
Ren, Luquan
Liu, Cai
Lu, Weiping
Kang T'ieh/Iron and Steel (Peking), 2001, 36 (07): : 30 - 33
[9] FORCE OF FRICTION WHEN ROLLING IN MULTIPLE-ROLL PASSES WITH A SMOOTH BARREL
VYDRIN, VN
BARKOV, LA
STEEL IN THE USSR, 1971, 1 (06): : 460 - &
[10] Numerical simulation of cold roll-forming processes
Bui, Q. V.
Ponthot, J. P.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2008, 202 (1-3) : 275 - 282

← 1 2 3 4 5 →