Suppression of Torque Ripple in Switched Reluctance Motors Which is Based on Synchronization Technology

The double salient pole structure of Switched Reluctance Motor (SRM) makes its electromagnetic field exist nonlinear saturation characteristics, resulting in its large torque pulsation in operation, so it is difficult to achieve speed regulation smoothly by traditional control methods. In view of this problem, a sliding mode control strategy which is based on synchronous transmission technology was proposed.Firstly, the basic structure of switched reluctance motor was analyzed, and the mathematical model of mechanical motion of switched reluctance motor was established. Secondly, an improved sliding mode controller which is based on synchronous signal transmission technology was designed by analyzing the reason of large torque ripple of switched reluctance motor, and the stability of the system was proved. Finally, simulation is used to verify the effectiveness of the control strategy.Compared with the traditional PID (Proportional Integral Differential) control algorithm, this control technology not only suppresses the SRM torque ripple effectively, but also makes the sliding mode controller output the precise target electromagnetic torque quickly by increasing the control variables. The results of research indicate that this design can not only restrain the torque ripple effectively, but also adjust the convergence speed and overshoot of the controller by adjusting the design parameters. © 2024 H. Li et al., licensed to EAI. This is an open access article distributed under the terms of the CC BY-NC-SA 4.0, which permits copying, redistributing, remixing, transformation, and building upon the material in any medium so long as the original work is properly cited