Rock stresses measurement with high stiffness hydraulic fracturing system in ILC kitakami site

被引:0
|
作者
20161502219436
机构
关键词
The hydraulic fracturing testing has the highest track record for techniques used in sub 1000 meter stress measurement. The predominant advantage of this method is that elastic constants such as Young's modulus and Poisson's ratio are not required for determining the value and direction of initial stress. The factors to determine the stress state are the water pressures of re-opening and shut-in of fractures around the borehole wall and its directions. With conventional methods; however; the accuracy of the derived stress states from the observation equations was often adversely affected by the lack of consideration of the remaining fluid pressure in fractures and insufficient stiffness of the pressurization system. We have developed a new hydraulic fracturing system based on a new test method concept overcoming these defects; and applied to a 300 meter deep borehole in granite. The most important improvement of the new system is an employment of a syringe pump that enables an accurate flow control of fluid with less than 1ml/min up to 30MPa. The new test system indicated pressure variations of the pressurized interval zone immediately after fluid injection; and the measured data was confirmed extremely accurate. Thus the rock stresses in ILC Kitakami site were determined quite accurately with our high stiffness hydraulic fracturing system. © 2014 by Japanese Committee for Rock Mechanics;
D O I
暂无
中图分类号
学科分类号
摘要
118520
引用
收藏
相关论文
共 50 条
  • [41] Development of dynamic monitoring test system for coal and rock hydraulic wetting range under true three-dimensional stresses
    Cheng W.
    Li H.
    Liu Y.
    Wang G.
    Huang Q.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2022, 41 (02): : 240 - 253
  • [42] On-line measurement test of pressure wavespeed in hydraulic system with high precision
    Liang Y.
    He L.
    Xu R.
    Chen Z.
    Guofang Keji Daxue Xuebao/Journal of National University of Defense Technology, 2022, 44 (02): : 195 - 202
  • [43] Assessing fracturing mechanisms and evolution of excavation damaged zone of tunnels in interlocked rock masses at high stresses using a finitediscrete element approach附视频
    IVazaios
    NVlachopoulos
    MSDiederichs
    Journal of Rock Mechanics and Geotechnical Engineering, 2019, (04) : 701 - 722
  • [44] Assessing fracturing mechanisms and evolution of excavation damaged zone of tunnels in interlocked rock masses at high stresses using a finite-discrete element approach
    Vazaios, I
    Vlachopoulos, N.
    Diederichs, M. S.
    JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, 2019, 11 (04) : 701 - 722
  • [45] Exploring the hydraulic fracturing parameter space: a novel high-pressure, high-throughput reactor system for investigating subsurface chemical transformations
    Sumner, Andrew J.
    Plata, Desiree L.
    ENVIRONMENTAL SCIENCE-PROCESSES & IMPACTS, 2018, 20 (02) : 318 - 331
  • [46] A new hydraulic fracturing method for rock stress measurement based on double pressure tubes internally installed in the wire-line core drilling pipes and its application
    Wu A.
    Han X.
    Yin J.
    Liu Y.
    Wu, Aiqing (wuaiqing@vip.sina.com), 2018, Academia Sinica (37): : 1126 - 1134
  • [47] Research on energy absorption effect of double damping system of high-power hydraulic rock drill
    Li, Yelin
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2022, 20 (04) : 1104 - 1112
  • [48] Effect of fracture backfill on the hydraulic fracturing behaviour of deep granite under high-temperature and high-pressure conditions: Implications for hot dry rock geothermal mining
    Yin, Weitao
    Feng, Zijun
    Zhao, Yangsheng
    RENEWABLE ENERGY, 2025, 243
  • [50] Construction Site Measurement of High or Large-Span Form Strut System
    Cai, Xuefeng
    Zhuang, Jinping
    Zhou, Jizhong
    ADVANCES IN STRUCTURES, PTS 1-5, 2011, 163-167 : 1226 - 1231