Post-processing ageing treatment of friction surfaced Al-16Si alloy: experimental and theoretical studies

被引：0

作者：

Bararpour, Seyedeh Marjan ^{[1
]}

Jamshidi Aval, Hamed ^{[1
]}

Jamaati, Roohollah ^{[1
]}

Javidani, Mousa ^{[2
]}

机构：

[1] Department of Materials Engineering, Babol Noshirvani University of Technology, Babol, Iran

[2] Department of Applied Science, University of Québec at Chicoutimi, Saguenay,QC, Canada

来源：

Materials Science and Technology (United Kingdom) | 2024年 / 40卷 / 05期

关键词：

D O I：

10.1177/02670836231214617

中图分类号：

学科分类号：

摘要：

In this study, we investigated the impact of ageing heat treatment following friction surfacing of a solid solution-treated Al-16Si alloy on coating geometry, microstructure, and wear resistance. We employed a simulation using the smoothed-particle hydrodynamics (SPH) method alongside experimental analysis. The simulation results revealed that as the rotational speed increased from 600 to 1000 rpm, the coating efficiency decreased significantly from 31.2 to 13.1%. When comparing the coating to the substrate and the consumable rod, it was seen that after ageing heat treatment, the wear rate of the coating made at a rotational speed of 600 rpm dropped by a lot, by 70% compared to the substrate and by 53% compared to the consumable rod. © Institute of Materials, Minerals and Mining 2024.

引用

页码：387 / 401

共 24 条

[1] Post-processing ageing treatment of friction surfaced Al-16Si alloy: experimental and theoretical studies
Bararpour, Seyedeh Marjan
Aval, Hamed Jamshidi
Jamaati, Roohollah
Javidani, Mousa
MATERIALS SCIENCE AND TECHNOLOGY, 2024, 40 (05) : 387 - 401
[2] Investigation of the effect of traverse speed in friction surfacing of Al-16Si alloy by smoothed-particle hydrodynamics (SPH) simulation and experimental study
Bararpour, Seyedeh Marjan
Aval, Hamed Jamshidi
Jamaati, Roohollah
Javidani, Mousa
COMPUTATIONAL PARTICLE MECHANICS, 2024, 11 (01) : 339 - 357
[3] Experimental and numerical investigation of Al-16Si alloy friction surfacing on AA1050 aluminum substrate: Effect of axial feeding rate
Bararpour, Seyedeh Marjan
Aval, Hamed Jamshidi
Jamaati, Roohollah
Javidani, Mousa
SURFACE & COATINGS TECHNOLOGY, 2023, 468
[4] Effect of preprocessing heat treatment of the Al-16Si-4Cu alloy on microstructure and tribological behavior of friction-surfaced coating
Bararpour, Seyedeh Marjan
Aval, Hamed Jamshidi
Jamaati, Roohollah
Javidani, Mousa
APPLIED SURFACE SCIENCE ADVANCES, 2024, 19
[5] Enhancing performance: Pre-processing heat treatment's influence on fast multiple rotation rolling of friction-surfaced Al-16Si-4Cu alloy
Bararpour, Seyedeh Marjan
Aval, Hamed Jamshidi
Jamaati, Roohollah
Javidani, Mousa
SURFACE & COATINGS TECHNOLOGY, 2024, 494
[6] POST-PROCESSING OF STIR CASTED Al-Si12Cu METAL MATRIX COMPOSITE BY FRICTION STIR PROCESSING
Sharma, Vipin
Kumar, Suresh
Dewang, Yogesh
Nagpal, Pardeep Kumar
INTERNATIONAL JOURNAL OF METALCASTING, 2022, 16 (04) : 1985 - 1994
[7] Post-Processing of Stir Casted Al–Si12Cu Metal Matrix Composite by Friction Stir Processing
Vipin Sharma
Suresh Kumar
Yogesh Dewang
Pardeep Kumar Nagpal
International Journal of Metalcasting, 2022, 16 : 1985 - 1994
[8] Effect of heat treatment before fast multiple rotation rolling on friction surfaced Al-Si-Cu alloy
Bararpour, Seyedeh Marjan
Aval, Hamed Jamshidi
Jamaati, Roohollah
Javidani, Mousa
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 940 - 953
[9] Effect of post-heat treatment on friction surfaced Al-Cu-Mg alloy coating containing Ag
Pirhayati, Parisa
Aval, Hamed Jamshidi
SURFACE & COATINGS TECHNOLOGY, 2020, 397 (397):
[10] Improving Comprehensive Properties of Wire ArcAdditively Manufactured Al-4043 Alloy by Bilateral Friction Stir Post-processing
Bai, Xingwang
Wang, Yong
Lv, Hao
Zhang, Haiou
Zhou, Xiangman
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025, 34 (01) : 208 - 220

← 1 2 3 →