Sustainability analysis of Ti-6Al-4V machining using statistical design methods: Effects of cooling techniques and machining strategies

被引：0
|
作者：
Hegab H. [1 ]
Hosseini A. [1 ]
Deiab I. [2 ]
Kishawy H.A. [1 ]
机构：
[1] Machining Research Laboratory (MRL), Faculty of Engineering and Applied Science, Ontario Tech University, Oshawa, L1H 7K4, ON
[2] Advanced Manufacturing Lab (AML), School of Engineering, University of Guelph, Guelph, N1G 2W1, ON
来源：
International Journal of Sustainable Manufacturing | 2021年 / 5卷 / 01期
关键词：
Hybrid machining; Minimum quantity lubrication; MQL; Sustainability; Ti-6Al-4V;
D O I：
10.1504/IJSM.2021.116844
中图分类号：
学科分类号：
摘要：
Minimising energy consumption and making machining processes more environmentally friendly are the two essential requirements of sustainable machining. As a result, development of technologically advanced yet efficient machining processes with minimum energy consumption and least toxic wastes is an evolving field of research and study. In this paper, effects of several lubrication techniques as well as different machining strategies (classic and hybrid), when machining Ti-6Al-4V, have been studied. Three different factors, namely energy consumption, surface quality and flank wear have been measured during the tests to evaluate the effectiveness of different lubrication techniques and machining strategies. Analysis of variance (ANOVA) has also been employed to analyse the influence of process parameters on the above-mentioned factors to determine the optimum levels of machining parameters and verify the experimental results. Accuracy of the model has finally been verified using the ANOVA results. Copyright © 2021 Inderscience Enterprises Ltd.
引用
收藏
页码：1 / 22
页数：21
相关论文
共 50 条
  • [1] Effects of cooling air temperature on cryogenic machining of Ti-6Al-4V alloy
    Yuan, S. M.
    Yan, L. T.
    Liu, W. D.
    Liu, Q.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (03) : 356 - 362
  • [2] Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V
    Hong, SY
    Ding, YC
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (10): : 1417 - 1437
  • [3] Machining Ti-6Al-4V alloy with cryogenic compressed air cooling
    Sun, S.
    Brandt, M.
    Dargusch, M. S.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2010, 50 (11): : 933 - 942
  • [4] Energy efficient machining of Ti-6Al-4V
    Denkena, Berend
    Helmecke, Patrick
    Huelsemeyer, Lars
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, 64 (01) : 61 - 64
  • [5] A NUMERICAL AND STATISTICAL APPROACH OF DRILLING PERFORMANCE ON MACHINING OF Ti-6Al-4V ALLOY
    Ugur, Levent
    SURFACE REVIEW AND LETTERS, 2022, 29 (12)
  • [6] PERFORMANCE ANALYSIS OF WIRE ELECTRODES ON MACHINING Ti-6Al-4V ALLOY USING ELECTRICAL DISCHARGE MACHINING PROCESS
    Ramamurthy, A.
    Sivaramakrishnan, R.
    Muthuramalingam, T.
    Venugopal, S.
    MACHINING SCIENCE AND TECHNOLOGY, 2015, 19 (04) : 577 - 592
  • [7] A research on machining parameters during dry machining of Ti-6Al-4V alloy
    Samsudeensadham, S.
    Mohan, A.
    Krishnaraj, V.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 9354 - 9360
  • [8] Thermo mechanical loads In Ti-6Al-4V machining
    Arrazola, Pedro J.
    Matsumura, Takashi
    Armentia, Igor
    Kortabarria, Aitor
    CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3, 2013, 554-557 : 2047 - 2053
  • [9] The Influence of Cryogenic Coolants in Machining of Ti-6Al-4V
    Jerold, B. Dilip
    Kumar, M. Pradeep
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2013, 135 (03):
  • [10] Modelling and Optimization of Machining of Ti-6Al-4V Titanium Alloy Using Machine Learning and Design of Experiments Methods
    Outeiro, Jose
    Cheng, Wenyu
    Chinesta, Francisco
    Ammar, Amine
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2022, 6 (03):
12345