Multiobjective optimization of a hybrid electricity generation system based on waste energy of internal combustion engine and solar system for sustainable environment

被引:1
|
作者
Al-Hawary S.I.S. [1 ]
Ricardo Nuñez Alvarez J. [2 ]
Ali A. [3 ]
Kumar Tripathi A. [4 ]
Rahardja U. [5 ]
Al-Kharsan I.H. [6 ]
Romero-Parra R.M. [7 ]
Abdulameer Marhoon H. [8 ]
John V. [9 ]
Hussian W. [10 ]
机构
[1] Department of Business Administration, Business School, Al al-Bayt University, P.O.BOX 130040, Mafraq
[2] Energy Department, Universidad de la Costa, Barranquilla
[3] Interdisciplinary Research Center for Renewable Energy and Power Systems (IRC-REPS), King Fahad University of Petroleum and Minerals, Dhahran
[4] Department of Mining Engineering, Aditya Engineering College, Surampalem, Andhra Pradesh
[5] Faculty of Science and Technology, University of Raharja, Jl. Jenderal Sudirman No.40, RT.002/RW.006, Cikokol, Kec. Tangerang, Banten, Kota Tangerang
[6] Computer Technical Engineering Department, College of Technical Engineering, The Islamic University, Najaf
[7] Department: General Studies, Universidad Continental, Lima
[8] Information and Communication Technology Research Group, Scientific Research Center, Al-Ayen University, Thi-Qar
[9] Mechanical Engineering, Uttaranchal Institute of Technology, Uttaranchal University, Dehradun
[10] Medical Technical College, Al-Farahidi University, Baghdad
关键词
Exergoeconomic analysis; Hybrid power generation; Internal combustion engine; Multiobjective optimization; Organic rankine cycle; Solar flat plate collector;
D O I
10.1016/j.chemosphere.2023.139269
中图分类号
学科分类号
摘要
In recent years, the interest in generating power through hybrid power generation systems has increased. In this study, a hybrid power generation system including an internal combustion engine (ICE) and a solar system based on flat plate collectors to generate electricity is investigated. To benefit from the thermal energy absorbed by solar collectors, an organic Rankine cycle (ORC) is considered. In addition to the solar energy absorbed by the collectors, the heat source of the ORC is the wasted heat through exhaust gases and the cooling system of the ICE. A two-pressure configuration for ORC is proposed for optimal heat absorption from the three available heat sources. The proposed system is installed to produce power with a capacity of 10 kW. A bi-objective function optimization process is carried out to design this system. The objective of the optimization process is to minimize the total cost rate and maximize the exergy efficiency of the system. The design variables of the present problem include the ICE rated power, the number of solar flat plate collectors (SFPC), the pressure of the high-pressure (HP) and low-pressure (LP) stage of the ORC, the degree of superheating of the HP and LP stage of the ORC, and its condenser pressure. Finally, it is observed among the design variables the most impact on total cost and exergy efficiency is related to the ICE rated power and the number of SFPCs. © 2023 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [41] Analysis of a power generation system based on the internal combustion engine with produced syngas fuel from municipal solid waste with the Monte Carlo method
    Vali, Fatemeh
    Behbahaninia, Ali
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2025,
  • [42] Prime Mover Capacity Optimization and Thermodynamic Performance Analysis of Internal Combustion Engine Based CCHP System
    WANG Shucheng
    MUHAMMAD Imran
    LI Hongwei
    CHEN Xiaoxu
    QIN Mei
    Journal of Thermal Science, 2023, 32 (04) : 1583 - 1594
  • [43] Prime Mover Capacity Optimization and Thermodynamic Performance Analysis of Internal Combustion Engine Based CCHP System
    Wang, Shucheng
    Muhammad, Imran
    Li, Hongwei
    Chen, Xiaoxu
    Qin, Mei
    JOURNAL OF THERMAL SCIENCE, 2023, 32 (04) : 1583 - 1594
  • [44] Prime Mover Capacity Optimization and Thermodynamic Performance Analysis of Internal Combustion Engine Based CCHP System
    Shucheng Wang
    Imran Muhammad
    Hongwei Li
    Xiaoxu Chen
    Mei Qin
    Journal of Thermal Science, 2023, 32 : 1583 - 1594
  • [45] Optimization Based Methodology for Hybrid Electric Vehicle Dedicated Internal Combustion Engine Design
    Huin, Xavier
    Di Loreto, Michael
    Bideaux, Eric
    Benzaoui, Hellal
    2020 7TH INTERNATIONAL CONFERENCE ON CONTROL, DECISION AND INFORMATION TECHNOLOGIES (CODIT'20), VOL 1, 2020, : 195 - 200
  • [46] A hybrid solar and chemical looping combustion system for solar thermal energy storage
    Jafarian, Mehdi
    Arjomandi, Maziar
    Nathan, Graham J.
    APPLIED ENERGY, 2013, 103 : 671 - 678
  • [47] Installed Capacity Optimization of Hybrid Energy Generation System
    Wai, Rong-Jong
    Cheng, Shan
    Chen, Yi-Chang
    2011 6TH IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS (ICIEA), 2011, : 2682 - 2687
  • [48] Potential of Solar Energy System in Electricity Generation from Islamic Perspective
    Hafshar, S. Siti
    GLOBAL JOURNAL AL-THAQAFAH, 2015, 5 (02) : 111 - 121
  • [49] Hydrogen fuel and electricity generation from a new hybrid energy system based on wind and solar energies and alkaline fuel cell
    Wang, Zhanlei
    Zhang, Xiaoqiang
    Rezazadeh, Ali
    ENERGY REPORTS, 2021, 7 : 2594 - 2604