The influence of type of dispersed phase on rolling contact fatigue of lubricating greases on mineral base oil

被引:0
|
作者
Kozdrach R. [1 ]
机构
[1] Research Network Lukasiewicz – Institute for Sustainable Technologies, K. Pulaski 6/10, Radom
来源
Tribologia | 2020年 / 37卷 / 01期
关键词
Dispersed phase; Lubricating grease; Pitting; Rolling contact fatigue; Thickener; Weibull curve;
D O I
10.30678/fjt.87221
中图分类号
学科分类号
摘要
The paper discusses the influence of type dispersed phase on value of rolling contact fatigue of bearings lubricated with selected lubricating compositions. The compositions, which were produced on the mineral base oil were thickened of lithium stearate, calcium stearate, aluminum stearate, lithium complex soap and modified silica, montmorillonite, and polytetrafluoroethylene were evaluated. Were carried out the investigations of rolling contact fatigue (pitting) of bearings, which were lubricated of the compositions prepared on the above-mentioned thickeners. Then was evaluated the influence of various thickeners on changes of rolling contact fatigue. The tribological tests were carried out using T-03 four-ball machine under high load conditions. On the basis of obtained results it may be concluded, that used of thickeners such as: modified amorphous silica, montmorillonite and polytetrafluoroethylene to produce of lubricating compositions, positively affected on the change of rolling contact fatigue of tribosystems lubricated with the above-mentioned compositions in comparison to the compositions, when as a dispersed phase were used a soap thickeners. © 2020 The Author.
引用
收藏
页码:33 / 45
页数:12
相关论文
共 50 条
  • [31] LUBRICATING EFFECTIVENESS OF OIL-SOLUBLE ADDITIVES AND MOLYBDENUM-DISULFIDE DISPERSED IN MINERAL-OIL
    BARTZ, WJ
    OPPELT, J
    LUBRICATION ENGINEERING, 1980, 36 (10): : 579 - 585
  • [32] Rolling Contact Fatigue Type Analysis of Rolling Bearing by XRD and TEM
    Hidaka, Hideyuki
    Ueda, Kouji
    Mitamura, Nobuaki
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 1679 - 1684
  • [33] INFLUENCES OF VISCOSITY OF LUBRICATING OIL ON THE ROLLING-CONTACT FATIGUE-STRENGTH OF FERRITIC STAINLESS-STEEL (SUS 405)
    FUKUI, T
    FUJITA, T
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1986, 31 (07): : 501 - 506
  • [34] The influence of track geometry irregularities on rolling contact fatigue
    Karttunen, K.
    Kabo, E.
    Ekberg, A.
    WEAR, 2014, 314 (1-2) : 78 - 86
  • [35] Influence of crowning on rolling contact fatigue of steel rollers
    Fujii, M
    Yoshida, A
    Bayasgalan, S
    Minesgishi, K
    Tamenaga, J
    International Conference on Gears, Pts 1 and 2: EUROPE INVITES THE WORLD, 2005, 1904 : 1743 - 1748
  • [36] DEVELOPMENT OF A NEW TYPE ROLLING OIL .5. THE APPLICATION OF THE DISPERSED TYPE ROLLING OIL AT THE ACTUAL COLD-ROLLING MILL
    IWADOH, S
    KATAYAMA, T
    NISHIMURA, H
    KUWAMOTO, H
    JIMBA, T
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 24 (09) : B304 - B304
  • [37] Influence of the contact pressure on rolling contact fatigue initiation of 1070 steel
    Lu, Lijuan
    Wang, Xiaogui
    Gao, Zengliang
    Jiang, Yanyao
    11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10 : 3000 - 3005
  • [38] The Influence of Viscosity of Mineral Oil in the Microstructure and Performances of Lithium-Based Greases
    Zhang E.
    Li W.
    Zhao G.
    Bao X.
    Wang X.
    Mocaxue Xuebao/Tribology, 2022, 42 (06): : 1258 - 1266
  • [39] THE INFLUENCE OF TEMPERATURE ON THE LUBRICATING EFFECTIVENESS OF MOS2 DISPERSED IN MINERAL-OILS
    ROLEK, RJ
    CUSANO, C
    SLINEY, HE
    ASLE TRANSACTIONS, 1985, 28 (04): : 493 - 502
  • [40] Influence of non-metallic inclusion's type on rolling contact fatigue life of bearings
    Nitanai, A
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2001, 46 (09) : 686 - 691