Estimation of parallelism measurement uncertainty according to the Geometrical Product Specifications standard using coordinate measuring machine

被引：0
|
作者：
Habibi N. [1 ]
Jalid A. [1 ]
Salih A. [1 ]
Hanane H. [2 ]
机构：
[1] Laboratoire de Recherche PCMT, Mohammed v University of Rabat, Avenue de l'Armée Royale, Rabat
[2] Measurement Control Center MCC, 269, Zone Industrielle SUD-OUEST, Mohammedia
来源：
International Journal of Metrology and Quality Engineering | 2023年 / 14卷
关键词：
Coordinate measuring machine (CMM); Guide to the expression of uncertainty in measurement (GUM); Inter-laboratory comparison (ILC); Monte Carlo simulation (MCS); Parallelism error; Parallelism uncertainty;
D O I：
10.1051/ijmqe/2023003
中图分类号：
学科分类号：
摘要：
The dimensional and geometrical specifications control of a mechanical part is commonly done using a coordinate measuring machine. Collecting and processing measurement data through a probe, it allows measuring the conformity of the part according to specific tolerances. An accurate estimation of the uncertainty of measurement is critical; it is within this framework that our study is oriented; we aim to estimate the measurement uncertainty of parallelism error using the Guide to the Expression of Measurement Uncertainty (GUM), then we will proceed to a Monte Carlo simulation to compare the obtained uncertainty, we will then proceed to an inter-laboratory comparison to validate our model. Our contribution is based on a more detailed and precise estimation of the uncertainties of the measurement process taking into accounts the calibration of the machine and the propagation of uncertainties. © N. Habibi et al., Published by EDP Sciences, 2023.
引用
收藏
相关论文
共 49 条
  • [41] Measurement uncertainty analysis on a five-axis nano coordinate measuring machine NMM-5D following a vectorial approach
    Fern, Florian
    Fuessl, Roland
    Manske, Eberhard
    Schienbein, Ralf
    Theska, Rene
    Ortlepp, Ingo
    Leineweber, Johannes
    TM-TECHNISCHES MESSEN, 2021, 88 (02) : 61 - 70
  • [42] Measurement of form error of a probe tip ball for coordinate measuring machine (CMM) using a rotating reference sphere
    Ito, So
    Tsutsumi, Daisuke
    Kamiya, Kazuhide
    Matsumoto, Kimihisa
    Kawasegi, Noritaka
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2020, 61 : 41 - 47
  • [43] Measurement point layout strategy of free-form surface based on gridding using coordinate measuring machine
    Zeng L.
    Chen Y.
    International Journal of Metrology and Quality Engineering, 2023, 14
  • [44] Measurement Uncertainty Estimation for the Quantitative Determination of Elemental Impurities in Active Pharmaceutical Ingredients Using Microwave Digestion Followed by ICP-OES According to USP <232> and <233> Specifications
    G. N. V. Satyanarayana
    Seetha Bala Subrahanyam
    N. Yamini Sai Silpa
    T. Nageswara Rao
    Manisha T. Sharma
    Mohana Krishna Reddy Mudiam
    MAPAN, 2022, 37 : 269 - 283
  • [45] Prediction of wrinkling in sheet metal by using modified Yoshida test and coordinate measuring machine (CMM) for wrinkle height measurement
    Manarvi, IA
    Balendra, R
    CONCURRENT ENGINEERING: ADVANCED DESIGN, PRODUCTION AND MANAGEMENT SYSTEMS, 2003, : 405 - 410
  • [46] Two-point diameter calibration of a sphere by a micro-coordinate measuring machine using a silicon gauge block as a reference standard
    Kondo, Yohan
    Hirai, Akiko
    Katsube, Toshiharu
    Kawashima, Natsumi
    Bitou, Youichi
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2025, 92 : 167 - 178
  • [47] Calculation of the unit normal vector using the cross-curve moving mask for measurement data obtained from a coordinate measuring machine
    Shiou, Fang-Jung
    Lee, Ruey-Tsung
    4th International Symposium on Instrumentation Science and Technology (ISIST' 2006), 2006, 48 : 122 - 127
  • [48] Method of improving the accuracy of the three-coordinate measuring machine (2nd report, Calibration method using the three-dimensional standard)
    Oya, Makoto
    Hokari, Hisashi
    Tamura, Hisashi
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1988, 54 (503): : 1445 - 1451
  • [49] Estimation of the Best Measurement Result and its Standard Uncertainty by Input Observations Processing Using the Method of Reference Samples Based on Order Statistics
    Dorozhovets, Mykhaylo
    Kochan, Orest
    2009 IEEE INTERNATIONAL WORKSHOP ON INTELLIGENT DATA ACQUISITION AND ADVANCED COMPUTING SYSTEMS: TECHNOLOGY AND APPLICATIONS, 2009, : 351 - +
12345