Influence of wiper edge on surface integrity for end-milling of Ti-6Al-4V

被引：0
|
作者：
Di Crescenzo A.D. [1 ]
Mousseigne M. [1 ]
Rubio W. [1 ]
机构：
[1] Institut Clément Ader, Université Fédérale de Toulouse Midi-Pyrénées, 3 rue Caroline Aigle, Toulouse
来源：
International Journal of Machining and Machinability of Materials | 2023年 / 25卷 / 01期
关键词：
end-milling; residual stresses; roughness; surface integrity; Ti-6Al-4V; wiper edge;
D O I：
10.1504/IJMMM.2023.129591
中图分类号：
学科分类号：
摘要：
The present study focuses on the process parameters influencing the surface quality of end-milled parts made of Ti-6Al-4V alloys with wiper edge insert. Part quality is understood here to mean geometric and mechanical surface criteria. The parameters involved are the cutting speed, the feed rate and the axial depth of cut. After preliminary test studies between two similar inserts, one was selected for its better performance. Then roughness and residual stresses were measured across several studies focusing on different cutting parameters. The main results of the study shows that the wiper edge plays a major role towards surface integrity and suppress the influence of feed rate and cutting speed on it. Moreover the surface integrity generated presents a roughness industrially acceptable for finishing (Ra < 0.8 µm) and compressive residual stresses that are positive towards fatigue life. Copyright © 2023 Inderscience Enterprises Ltd.
引用
收藏
页码：89 / 110
页数：21
相关论文
共 50 条
  • [11] Influence of milling stability on machined surface integrity and fatigue performance of Ti-6Al-4V titanium alloy
    Li, Mengyu
    Zhao, Wei
    Li, Liang
    He, Ning
    Stepan, Gabor
    ENGINEERING FAILURE ANALYSIS, 2025, 168
  • [12] Investigation of the effects of cryogenic machining on surface integrity in CNC end milling of Ti-6Al-4V titanium alloy
    Shokrani, Alborz
    Dhokia, Vimal
    Newman, Stephen T.
    JOURNAL OF MANUFACTURING PROCESSES, 2016, 21 : 172 - 179
  • [13] Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy
    H. Safari
    S. Sharif
    S. Izman
    H. Jafari
    The International Journal of Advanced Manufacturing Technology, 2015, 78 : 651 - 657
  • [14] Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy
    Safari, H.
    Sharif, S.
    Izman, S.
    Jafari, H.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 78 (1-4): : 651 - 657
  • [15] Experimental Study on Surface Integrity of Ti-6Al-4V in High Speed Side Milling
    杨晓勇
    任成祖
    王焱
    陈光
    Transactions of Tianjin University, 2012, 18 (03) : 206 - 212
  • [16] Experimental study on surface integrity of ti-6al-4v in high speed side milling
    Yang X.
    Ren C.
    Wang Y.
    Chen G.
    Transactions of Tianjin University, 2012, 18 (03) : 206 - 212
  • [17] Experimental Study on Surface Integrity of Ti-6Al-4V in High Speed Side Milling
    杨晓勇
    任成祖
    王焱
    陈光
    Transactions of Tianjin University, 2012, (03) : 206 - 212
  • [18] Machining Parameters Optimization in End Milling of Ti-6Al-4V
    Vijay, S.
    Krishnaraj, V
    INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013), 2013, 64 : 1079 - 1088
  • [19] Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
    S. Zhang
    J. F. Li
    J. Sun
    F. Jiang
    The International Journal of Advanced Manufacturing Technology, 2010, 46 : 69 - 78
  • [20] Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
    Zhang, S.
    Li, J. F.
    Sun, J.
    Jiang, F.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 46 (1-4): : 69 - 78
12345