Single-shot 3D measurement using grayscale expanded composited grating

被引：0
|
作者：
Li H. [1 ,2 ]
Cao Y. [1 ]
Wang Y. [1 ]
Wang L. [1 ]
Li C. [1 ]
An H. [1 ]
Xu C. [1 ]
机构：
[1] College of Electronics and Information Engineering, Sichuan University, Chengdu
[2] College of Physics and Engineering, Chengdu Normal University, Chengdu
来源：
Cao, Yiping (ypcao@scu.edu.cn) | 1600年 / Chinese Society of Astronautics卷 / 49期
关键词：
3D measurement; Grayscale expanding; Orthogonal composited grating; Time division multiplexing;
D O I：
10.3788/IRLA20200034
中图分类号：
学科分类号：
摘要：
A single-shot 3D shape measurement using orthogonal composited grating based on grayscale expanding (OCGGE) was proposed. In the traditional orthogonal composited grating (OCG) profilometry, the modulated gratings in the orthogonal composited grating must share the same grayscale level since the maximal grayscale dynamic range of commercial Digital Light Processing (DLP) is limited in 256, that results in some phenomenon increasing the measuring error, including the weakened contrast of the modulated grating, the compressed phase information and the broken phase during the process of phase unwrapping. Based on the principle of time division multiplexing, one orthogonal composited grating was designed with 766 gray level and was spited into three different fringe patterns with 256 grayscales, then loaded these patterns in sequence to edit a video. When this video was played and projected onto the measured object continuously, by setting the exposure time as an integer times of the 3 times of the frame refresh cycle of the video for a 10bit CCD, a deformed pattern with 766 grayscales could be obtained. After the filtering and grayscale calibration, the object could be reconstructed accurately and completely. Both simulation and experiment results prove that the proposed method can break the limit of 256 grayscale projection and increase the dynamic range of the phase-shifting deformed patterns efficiently. And it can also enrich the detailed information of the measured object and avoid the incomplete surface reconstruction caused by phase break. © 2020, Editorial Board of Journal of Infrared and Laser Engineering. All right reserved.
引用
收藏
相关论文
共 20 条
  • [11] Takeda M., Fourier transform profilometry for the automatic measurement of 3-D object shapes, Appl Opt, (1983)
  • [12] Guan C, Hassebrook L G, Lau D L., Composite structured light pattern for three-dimensional video, Optics Express, 11, 5, pp. 406-417, (2003)
  • [13] He Yuhang, Cao Yiping, Zhai Aiping, A 3-D measurement method with orthogonal composite light based on fringe contrast and background calibration, Acta Optica Sinica, 30, 11, pp. 3191-3196, (2010)
  • [14] Zhai Aiping, Cao Yiping, He Yuhang, 3D measurement with orthogonal composite structure light based on two-plus-one phase-shifting algorithm, Chinese Journal of Lasers, 39, 2, pp. 147-152, (2012)
  • [15] He Y H, Cao Y P., Shifted-phase calibration for a 3-D shape measurement system based on orthogonal composite grating projection, Optik, 122, 19, pp. 1730-1734, (2011)
  • [16] He D W, Cao Y P, He D G, Et al., Optimized design of composite grating in real-time three-dimensional shape measurement, Optik, 126, 21, pp. 2781-2787, (2015)
  • [17] Zhang Lizhen, Cao Yiping, Fu Guangkai, Et al., Application of grayscale expansion for accuracy improvement in phasemeasuring profilometry, Displays, 59, pp. 28-34, (2019)
  • [18] Cao Yiping, Su XianYu, Chen Wenjing, Et al., Effect on the phase measuring profilometer to the spatio-temporal characteristic of DMD, Optical Technique, 30, 2, pp. 157-160, (2004)
  • [19] Wang Z Z., Robust measurement of the diffuse surface by phase shift profilometry, Journal of Optics, 16, 10, (2014)
  • [20] Ma Q N, Cao Y P, Chen C, Et al., Intrinsic feature revelation of phase-to-height mapping in phase measuring profilometry, Optics & Laser Technology, 108, pp. 46-52, (2018)
12