A calibration-based method for interval reliability analysis Indexed by: Of the multi-manipulator system

被引：0
|
作者：
Wang W. [1 ,4 ]
Liu S. [2 ]
Wang J. [3 ,4 ]
Lu G. [3 ,4 ]
机构：
[1] Zhejiang Sci-Tech University, Faculty of Mechanical Engineering & Automation, Hangzhou
[2] Zhejiang Institute of Mechanical & Electrical Engineering, Hangzhou
[3] Zhejiang University, Engineering Research Center for Design Engineering and Digital Twin of Zhejiang Province, School of Mechanical Engineering, Hangzhou
[4] Zhejiang University, School of Mechanical Engineering, State Key Laboratory of Fluid Power and Mechatronic Systems, Hangzhou
来源：
Eksploatacja i Niezawodnosc | 2022年 / 24卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Base frame; Multiple manipulators; Reliability estimation; Series/parallel system;
D O I：
10.17531/EIN.2022.1.6
中图分类号：
学科分类号：
摘要：
The multiple manipulators can construct a special multi-agent system with the distinction that the type can be serial or parallel according to their cooperative way. We proposed a comprehensive method to handle the problem of reliability estimation. The wide and narrow bound method are applied to calculate the interval reliability respectively when multiple manipulators work as the series system. Aims to decrease the system complexity and enhance the dynamic adjustment capability, the base frame calibration technique is presented to convert the series system to a parallel one, naturally the reliability can be improved significantly. A system composed by three manipulators is utilized as an example to illustrate the feasibility of the proposed method. © 2022, Polish Academy of Sciences Branch Lublin. All rights reserved.
引用
收藏
页码：42 / 52
页数：10
相关论文
共 50 条
  • [1] A calibration-based method for interval reliability analysis of the multi-manipulator system
    Wang, Wei
    Liu, Shuangyao
    Wang, Jin
    Lu, Guodong
    EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY, 2022, 24 (01): : 42 - 52
  • [2] Calibrating a multi-manipulator robotic system
    Bonitz, RG
    Hsia, TC
    IEEE ROBOTICS & AUTOMATION MAGAZINE, 1997, 4 (01) : 18 - 22
  • [3] Agent-based planning and control of a multi-manipulator assembly system
    Fraile, JC
    Paredis, CJJ
    Wang, CH
    Khosla, PK
    ICRA '99: IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-4, PROCEEDINGS, 1999, : 1219 - 1225
  • [4] Development of a robotic microassembly system with multi-manipulator cooperation
    Huang, Xinhan
    Lv, Xiadong
    Wang, Min
    IEEE ICMA 2006: PROCEEDING OF THE 2006 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2006, : 1197 - +
  • [5] Trajectory coordination for a cooperative multi-manipulator system and dynamic simulation error analysis
    Su, Chunjian
    Zhang, Shuai
    Lou, Shumei
    Wang, Rui
    Cao, Gaohua
    Yang, Longyun
    Wang, Qing
    ROBOTICS AND AUTONOMOUS SYSTEMS, 2020, 131
  • [6] Decentralized Adaptive Consensus Control for Multi-Manipulator System with Uncertain Dynamics
    Cheng, Long
    Hou, Zeng-Guang
    Tan, Min
    2008 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN AND CYBERNETICS (SMC), VOLS 1-6, 2008, : 2712 - 2717
  • [7] Multi-Manipulator Motion Planning based on Gaussian Process with Probabilistic Inference
    Wang, Wenlong
    Hu, Biao
    2022 WRC SYMPOSIUM ON ADVANCED ROBOTICS AND AUTOMATION, WRC SARA, 2022, : 221 - 226
  • [8] Research on multi-task cooperative control and management method of industrial robot multi-manipulator
    Wang Z.
    International Journal of Manufacturing Technology and Management, 2022, 36 (5-6) : 393 - 406
  • [9] Online Noise-Estimation-based Neighbor Selection for Multi-Manipulator Systems
    Shen, Henghua
    Pan, Ya-Jun
    Bauer, Georgeta
    IFAC PAPERSONLINE, 2020, 53 (02): : 9802 - 9807
  • [10] Calibrating a multi-manipulator robotic system (vol 4, pg 20, 1997)
    Bonitz, RG
    Hsia, TC
    IEEE ROBOTICS & AUTOMATION MAGAZINE, 1997, 4 (02) : 44 - 44
12345