Convective heat transfer of lead-bismuth eutectic in a circular tube with half cycle heat flux

被引：0

作者：

Wu, Minqiang ^{[1
,2
]}

Zhu, Zhiqiang ^{[1
]}

Huang, Wangli ^{[1
]}

Bai, Yunqing ^{[1
]}

机构：

[1] Key Laboratory of Neutronics and Radiation Safety, Institute of Nuclear Safety Technology, Chinese Academy of Sciences, Hefei,230031, China

[2] University of Science and Technology of China, Hefei,230027, China

来源：

Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2019年 / 40卷 / 04期

关键词：

Eutectics - Energy dissipation - Navier Stokes equations - Bismuth - Prandtl number - Solar energy - Heat convection;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A numerical model of convective heat transfer of lead-bismuth eutectic (LBE) in the receiver tube with nonuniform heat flux was built. Fluent software was utilized to investigate the heat transfer property of LBE in the receiver tube with nonuniform heat flux through solving the three dimension N-S equation and energy equation. The simulation results of this study show that modeling of turbulent prandtl number is applicable to calculate the heat transfer of LBE in the receiver tube with nonuniform heat flux. The heat flux of LBE has little influence on Nusselt number (Nu) while the mass flow rate of LBE is of crucial importance in Nu. Furthermore, Nu of adiabatic is higher than that of the heating side. Compared to the molten salt, LBE has advantages in reducing the energy loss of the receiver pipe by virtue of exceptional heat transfer performance. © 2019, Editorial Board of Acta Energiae Solaris Sinica. All right reserved.

引用

页码：950 / 956

共 50 条

[21] EXPERIMENTAL RESEARCH ON HEAT TRANSFER CHARACTERISTIC OF LIQUID LEAD-BISMUTH EUTECTIC FLOWING IN ANNULAR CHANNEL
Zhu, Fengjie
Wu, Junmei
Shi, Leitai
Su, G. H.
PROCEEDINGS OF THE 26TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2018, VOL 5, 2018,
[22] Numerical study on the heat transfer characteristics of a liquid lead-bismuth eutectic in a D-type channel
Liu, Hong
Zhang, Zhigang
Du, Haisu
Cong, Tenglong
FRONTIERS IN ENERGY RESEARCH, 2022, 10
[23] Investigation on turbulent heat transfer to lead-bismuth eutectic flows in rough rod bundles for nuclear applications
Wang, Xiaowen
Liu, Maolong
Zhang, Rui
Fu, Junsen
Cong, Tenglong
Gu, Hanyang
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2024, 204
[24] Analysis on heat transfer characteristic of lead-bismuth eutectic alloy applied in solar thermal power generation
Chen, De-Ming
Shu, Jie
Li, Jian-Hong
Xu, Gang
2008, Shanghai Power Equipment Research Institute, Minhang, China (28):
[25] Simulation on Forced Convective Heat Transfer in Liquid Lead-Bismuth Alloy under Different Gravitational Environments
Song, Zhichao
Chen, Weiqi
He, Yurong
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2024, 45 (10): : 3073 - 3078
[26] Numerical simulation of heat-transfer and insoluble corrosion product deposition in lead-bismuth eutectic alloy
Yang, Xu
Zhou, Tao
Fang, Xiao-Lu
Lin, Da-Ping
Ru, Xiao-Long
Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 2015, 49 (08): : 1386 - 1392
[27] Numerical modeling of forced-convection heat transfer to lead-bismuth eutectic flowing in vertical annuli
Thiele, Roman
Anglart, Henryk
NUCLEAR ENGINEERING AND DESIGN, 2013, 254 : 111 - 119
[28] HEAT TRANSPORT IN LEAD-BISMUTH ALLOYS
OLSEN, JL
PROCEEDINGS OF THE PHYSICAL SOCIETY OF LONDON SECTION A, 1952, 65 (391): : 518 - 532
[29] Heat transfer characteristics and design optimization of compact heat exchanger with liquid lead-bismuth eutectic and sCO2 as working fluids
Luo, Zhiyuan
Li, Gen
PROGRESS IN NUCLEAR ENERGY, 2025, 184
[30] Optimization study on PCHE channels for lead-bismuth eutectic and supercritical carbon dioxide coupled flow and heat transfer
Fu, Xiangyu
Cai, Siwei
Qiu, Guodong
Sun, Jianchuang
Zhao, Bin
Li, Qian
Cai, Weihua
NUCLEAR ENGINEERING AND DESIGN, 2025, 435

← 1 2 3 4 5 →