Effects of Thermal Oxidation Temperature on Tribocorrosion Performance of TC4 Alloy in Physiological Saline Solution

被引：0
|
作者：
Cao L. [1 ,2 ]
Sun H. [3 ]
Xu T. [1 ]
Wan Y. [1 ,2 ]
Pu J. [4 ]
机构：
[1] School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao, 266033, Shandong
[2] State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou, 730000, Gansu
[3] The Ninth People's Hospital of Qingdao, Qingdao, 266001, Shandong
[4] Key Laboratory of Marine Materials and Related Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, 315201, Zhejiang
来源：
Mocaxue Xuebao/Tribology | 2019年 / 39卷 / 04期
基金：
中国国家自然科学基金;
关键词：
Corrosion; Temperature; Thermal oxidation; Ti6Al4V; Tribocorrosion;
D O I：
10.16078/j.tribology.2019002
中图分类号：
学科分类号：
摘要：
The tribocorrosion performance of TC4 titanium alloy after thermally oxidized(TO) in atomosphere was discussed. The effect of TO temperature on the characteristics of the oxide layer and tribocorrosion performance of TC4 alloy obtained at temperature range of 500~900℃ was evaluated. The results show that the TO layer consisted of three sections: top layer of TiO2, and α-Al2O3, sub-surface layer of TiO2, and oxygen diffusion zone. TO temperatures have a significant influence on the phase structure, surface hardness, and tribocorrosion resistance of TO layers. TO samples, obtained after treated at 700℃, offer best tribocorrosion resistance in 0.9% NaCl solution for higher surface hardness, more noble corrosion potential, and lowest mass loss in comparison with other TO ones and TC4 substrate. © 2019, Science Press. All right reserved.
引用
收藏
页码：396 / 406
页数：10
相关论文
共 37 条
  • [11] Xia M., Zhang Y., Zhou G., Et al., Research progress in surface modification of biomedical Ti6Al4V alloy, Corrosion & Protection, 33, 8, pp. 645-647, (2012)
  • [12] Zhou M., Xiong P., Jia Z., Et al., Improved the in vitro cell compatibility and apatite formation of porous Ti6Al4V alloy with magnesium by plasma immersion ion implantation, Materials Letters, 202, pp. 9-12, (2017)
  • [13] Wang J., Ma J., Huang W., Et al., The investigation of the structures and tribological properties of F-DLC coatings deposited on Ti-6Al-4V alloys, Surface and Coatings Technology, 316, pp. 22-29, (2017)
  • [14] Oliveira V., Aguiar C., Vazquez A.M., Et al., Improving corrosion resistance of Ti-6Al-4V alloy through plasma- assisted PVD deposited nitride coatings, Corrosion Science, 88, pp. 317-327, (2014)
  • [15] Fazel M., Salimijazi H.R., Golozar M.A., A comparison of corrosion, tribocorrosion and electrochemical impedance properties of pure Ti and Ti6Al4V alloy treated by micro-arc oxidation process, Applied Surface Science, 324, pp. 751-756, (2015)
  • [16] Gu Y., Chen L., Yue W., Et al., Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layer, Journal of Alloys and Compounds, 664, pp. 770-776, (2016)
  • [17] Lv Y.H., Li J., Tao Y.F., Et al., High-temperature wear and oxidation behaviors of TiNi/Ti2Ni matrix composite coatings with TaC addition prepared on Ti6Al4V by laser cladding, Applied Surface Science, 402, pp. 478-494, (2017)
  • [18] Wang S., Liao Z., Liu Y., Et al., Influence of thermal oxidation temperature on the microstructural and tribological behavior of Ti6Al4V alloy, Surface and Coatings Technology, 240, pp. 470-477, (2014)
  • [19] Guleryuz H., Cimenoglu H., Surface modification of a Ti-6Al-4V alloy by thermal oxidation, Surface and Coatings Technology, 192, 2-3, pp. 164-170, (2005)
  • [20] Wang S., Liu Y., Zhang C., Et al., The improvement of wettability, biotribological behavior and corrosion resistance of titanium alloy pretreated by thermal oxidation, Tribology International, 79, pp. 174-182, (2014)
1234