Improved corrosion performance of selective laser melted stainless steel 316L in the deep-sea environment

被引：46
|
作者：
Zhao Y. [1 ]
Xiong H. [2 ]
Li X. [2 ]
Qi W. [1 ]
Wang J. [1 ]
Hua Y. [3 ]
Zhang T. [1 ]
Wang F. [1 ]
机构：
[1] Shenyang National Laboratory for Materials Science, Northeastern University, Shenyang
[2] Corrosion and Protection Laboratory, Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Ministry of Education, Harbin
[3] Institute of Functional Surfaces, School of Mechanical Engineering, University of Leeds, Leeds
来源：
Corrosion Communications | 2021年 / 2卷
基金：
中国国家自然科学基金;
关键词：
Corrosion resistance; Dissolution; Grain boundary; Precipitation; Selective laser melting;
D O I：
10.1016/j.corcom.2021.09.002
中图分类号：
学科分类号：
摘要：
Through electrochemical and surface analysis, the composition, semi-conductive property and electrochemical performance of the passive film formed on selective laser melting stainless steel 316L (SLM SS316L) and wrought SS316L in the deep sea environment were analyzed, respectively. Results indicated that the corrosion resistance of SS316L can be enhanced by the SLM process, which is attributed to the greatly smaller grain size and higher density of grain boundaries. Grain boundary, i.e. metallurgical defects, enhances the dissolution of SS316L and releases a large quantity of Cr3+ ions at the interface. Then Cr(OH)3 precipitated and dehydrated to produce much more stable oxides Cr2O3. As a result, a thin and compact passive film formed on the SLM SS316L, which then suppressed localized corrosion and resulted in high corrosion resistance. © 2021
引用
收藏
页码：55 / 62
页数：7
相关论文
共 50 条
  • [41] The influence of heat treatment on the microstructure and corrosion behavior of selective laser melted 316L stainless steel in Ringer's solution
    Jazaeri Moghadas, Seyed Mohammadali
    Yeganeh, Mahdi
    Zaree, Seyed Reza Alavi
    Eskandari, Mostafa
    SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2022, 10 (02):
  • [42] Comparing the sensitization behavior and the corrosion resistance of the wrought and selective laser melted 316L stainless steels
    Lv Jinlong
    Zhou Zhiping
    Wang Zhuqing
    MATERIALS LETTERS, 2022, 328
  • [43] Comparing the sensitization behavior and the corrosion resistance of the wrought and selective laser melted 316L stainless steels
    Lv Jinlong
    Zhou Zhiping
    Wang Zhuqing
    MATERIALS LETTERS, 2022, 328
  • [44] Microstructure and Corrosion Characteristics of Selective Laser-Melted 316L Stainless Steel: The Impact of Process-Induced Porosities
    Kazemipour, M.
    Mohammadi, M.
    Mfoumou, E.
    Nasiri, A. M.
    JOM, 2019, 71 (09) : 3230 - 3240
  • [45] Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes
    Decheng Kong
    Chaofang Dong
    Xiaoqing Ni
    Liang Zhang
    Jizheng Yao
    Cheng Man
    Xuequn Cheng
    Kui Xiao
    Xiaogang Li
    JournalofMaterialsScience&Technology, 2019, 35 (07) : 1499 - 1507
  • [46] Comparing the sensitization behavior and the corrosion resistance of the wrought and selective laser melted 316L stainless steels
    Lv Jinlong
    Zhou Zhiping
    Wang Zhuqing
    MATERIALS LETTERS, 2022, 328
  • [47] Comparing the sensitization behavior and the corrosion resistance of the wrought and selective laser melted 316L stainless steels
    Lv Jinlong
    Zhou Zhiping
    Wang Zhuqing
    MATERIALS LETTERS, 2022, 328
  • [48] Effect of Microstructural Bands on the Localized Corrosion of Laser Surface-Melted 316L Stainless Steel
    Hwa, Yoon
    Kumai, Christopher S.
    Yang, Nancy
    Yee, Joshua K.
    Devine, Thomas M.
    CORROSION, 2021, 77 (09) : 1014 - 1024
  • [49] Corrosion Resistance Measurement of 316L Stainless Steel Manufactured by Selective Laser Melting
    Guzman-Nogales, Rigoberto
    Estupinan-Lopez, Francisco
    Gaona-Tiburcio, Citlalli
    Lopez-Botello, Omar E.
    Ramirez-Rodriguez, Juan G.
    Zambrano-Robledo, Patricia C.
    MATERIALS, 2021, 14 (16)
  • [50] Investigating the effect of laser shock peening on the wear behaviour of selective laser melted 316L stainless steel
    Hareharen, K.
    Kumar, S. Pradeep
    Panneerselvam, T.
    Babu, P. Dinesh
    Sriraman, N.
    OPTICS AND LASER TECHNOLOGY, 2023, 162
12345