Improved corrosion performance of selective laser melted stainless steel 316L in the deep-sea environment

被引：46

作者：

Zhao Y. ^{[1
]}

Xiong H. ^{[2
]}

Li X. ^{[2
]}

Qi W. ^{[1
]}

Wang J. ^{[1
]}

Hua Y. ^{[3
]}

Zhang T. ^{[1
]}

Wang F. ^{[1
]}

机构：

[1] Shenyang National Laboratory for Materials Science, Northeastern University, Shenyang

[2] Corrosion and Protection Laboratory, Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Ministry of Education, Harbin

[3] Institute of Functional Surfaces, School of Mechanical Engineering, University of Leeds, Leeds

来源：

Corrosion Communications | 2021年 / 2卷

基金：

中国国家自然科学基金;

关键词：

Corrosion resistance; Dissolution; Grain boundary; Precipitation; Selective laser melting;

D O I：

10.1016/j.corcom.2021.09.002

中图分类号：

学科分类号：

摘要：

Through electrochemical and surface analysis, the composition, semi-conductive property and electrochemical performance of the passive film formed on selective laser melting stainless steel 316L (SLM SS316L) and wrought SS316L in the deep sea environment were analyzed, respectively. Results indicated that the corrosion resistance of SS316L can be enhanced by the SLM process, which is attributed to the greatly smaller grain size and higher density of grain boundaries. Grain boundary, i.e. metallurgical defects, enhances the dissolution of SS316L and releases a large quantity of Cr3+ ions at the interface. Then Cr(OH)3 precipitated and dehydrated to produce much more stable oxides Cr2O3. As a result, a thin and compact passive film formed on the SLM SS316L, which then suppressed localized corrosion and resulted in high corrosion resistance. © 2021

引用

页码：55 / 62

页数：7

共 50 条

[1] Improved corrosion performance of selective laser melted stainless steel 316L in the deep-sea environment
Zhao, Yang
Xiong, Hang
Li, Xuanpeng
Qi, Wenlong
Wang, Jidong
Hua, Yong
Zhang, Tao
Wang, Fuhui
CORROSION COMMUNICATIONS, 2021, 2 : 55 - 62
[2] Improved corrosion performance of selective laser melted stainless steel 316L in the deep-sea environment
Yang Zhao
Hang Xiong
Xuanpeng Li
Wenlong Qi
Jidong Wang
Yong Hua
Tao Zhang
Fuhui Wang
Corrosion Communications, 2021, 2 (02) : 55 - 62
[3] Improved corrosion performance of selective laser melted stainless steel 316L in the deep-sea environment(vol 2, pg 55, 2021)
Zhao, Yang
Xiong, Hang
Li, Xuanpeng
Qi, Wenlong
Wang, Jidong
Hua, Yong
Zhang, Tao
Wang, Fuhui
CORROSION COMMUNICATIONS, 2023, 10
[4] Tribological performance of selective laser melted 316L stainless steel
Li, Hua
Ramezani, Maziar
Li, Ming
Ma, Chao
Wang, Jyhwen
TRIBOLOGY INTERNATIONAL, 2018, 128 : 121 - 129
[5] The passivity of selective laser melted 316L stainless steel
Kong, Decheng
Dong, Chaofang
Ni, Xiaoqing
Zhang, Liang
Luo, Hong
Li, Ruixue
Wang, Li
Man, Cheng
Li, Xiaogang
APPLIED SURFACE SCIENCE, 2020, 504
[6] Tensile Properties of Selective Laser Melted 316L Stainless Steel
Yu Chenfan
Zhao Congcong
Zhang Zhefeng
Liu Wei
ACTA METALLURGICA SINICA, 2020, 56 (05) : 683 - 692
[7] Strengthening mechanisms in selective laser melted 316L stainless steel
Chen, Siqi
Ma, Guoqiang
Wu, Guilin
Godfrey, Andrew
Huang, Tianlin
Huang, Xiaoxu
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 832
[8] Mechanical behavior of selective laser melted 316L stainless steel
Suryawanshi, Jyoti
Prashanth, K. G.
Ramamurty, U.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 696 : 113 - 121
[9] Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel
Sun, Y.
Moroz, A.
Alrbaey, K.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (02) : 518 - 526
[10] Wear anisotropy of selective laser melted 316L stainless steel
Yang, Y.
Zhu, Y.
Khonsari, M. M.
Yang, H.
WEAR, 2019, 428 : 376 - 386

← 1 2 3 4 5 →