A Review of Research Advances in Micro-drill Manufacturing Technology

被引：1
|
作者：
Yuan S. [1 ,2 ,3 ]
Chen B. [1 ,2 ]
Shao M. [1 ,2 ,3 ]
机构：
[1] School of Mechanical Engineering and Automation, Beihang University, Beijing
[2] Beijing Engineering Technological Research Center of High-Efficient and Green CNC Machining Process and Equipment, Beijing
[3] Ningbo Institute of Technology, Beihang University, Ningbo
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 03期
关键词：
laser machining; micro drilling; PCD micro-drilling tools; tool coating; tool manufacturing;
D O I：
10.3901/JME.2023.03.265
中图分类号：
学科分类号：
摘要：
With the fast-paced development of aerospace, medicine, automobile and electronic industry, the demand of precision equipment and microstructure increases steeply. The common difficult to cut feature of micro holes (d≤1mm) in microstructure is the key to promote the development of related fields. Therefore, the micro holes manufacturing had always been a hotspot and challenge in the machining industry. Many researchers have conducted relevant research from multiple perspectives and generated fruitful research results. As micro holes drilling technology and tool performance is still the core of micro holes manufacturing at this stage,, this paper summarizes the important technical progress in the field of micro drilling tool manufacturing in recent years. This article focus on the selection of micro drilling tool materials, geometric angle design of micro drilling tools, manufacturing process methods of micro drilling tools, etc. This paper also summarizes the processing parameters of microporous drilling under different materials and working conditions, which can be used as the basis for the selection of processing parameters. © 2023 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：265 / 282
页数：17
相关论文
共 84 条
  • [71] LEI Xuelin, Study on the fabrication and application of diamond films on micro cutting tools, (2015)
  • [72] YAO S H., Evaluation of TiN/AlN nano-multilayer coatings on drills used for micro-drilling[J], Surface and Coatings Technology, 197, 2-3, pp. 351-357, (2005)
  • [73] YAO S H, SU Y L, KAO W X., Development of Zr-Ti-N coatings for micro drills for machining of PCBs[C], Advanced Materials Research, 591, pp. 337-341, (2012)
  • [74] UENG H Y, GUO C T., Diamond-like carbon coatings on microdrill using an ECR-CVD system[J], Applied Surface Science, 249, 1-4, pp. 246-256, (2005)
  • [75] GIORLEO L, GIARDINI C., ALD coated tools in micro drilling of Ti sheet[J], CIRP annals, 60, 1, pp. 595-598, (2011)
  • [76] GENG C L, TANG W Z, HEI L F，, Et al., Fracture strength of two-step pretreated and diamond coated cemented carbide microdrills[J], International Journal of Refractory Metals and Hard Materials, 25, 2, pp. 159-165, (2007)
  • [77] KANG M C, TAK H S, JEONG Y K, Et al., Properties and tool performance of ta-C films deposited by double-bend filtered cathodic vacuum arc for micro drilling applications[J], Diamond and Related Materials, 19, 7-9, pp. 866-869, (2010)
  • [78] LEI X, WANG L，, SHEN B, Et al., Microdrill with variations in thickness of diamond coating[J], Surface Engineering, 32, 3, pp. 165-171, (2016)
  • [79] LEE A C, HORNG J H, TUYEN N D, Et al., Design of a new micro single flute drill[C], Advanced Materials Research, 860, pp. 2635-2639, (2014)
  • [80] OHNISHI O，, ONIKURA H，, EGUCHI T，, Et al., Improvement in drilling performance of micro compound tool[C], Key Engineering Materials, 447, pp. 96-100, (2010)
123456789