A Review of Research Advances in Micro-drill Manufacturing Technology

被引：1
|
作者：
Yuan S. [1 ,2 ,3 ]
Chen B. [1 ,2 ]
Shao M. [1 ,2 ,3 ]
机构：
[1] School of Mechanical Engineering and Automation, Beihang University, Beijing
[2] Beijing Engineering Technological Research Center of High-Efficient and Green CNC Machining Process and Equipment, Beijing
[3] Ningbo Institute of Technology, Beihang University, Ningbo
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2023年 / 59卷 / 03期
关键词：
laser machining; micro drilling; PCD micro-drilling tools; tool coating; tool manufacturing;
D O I：
10.3901/JME.2023.03.265
中图分类号：
学科分类号：
摘要：
With the fast-paced development of aerospace, medicine, automobile and electronic industry, the demand of precision equipment and microstructure increases steeply. The common difficult to cut feature of micro holes (d≤1mm) in microstructure is the key to promote the development of related fields. Therefore, the micro holes manufacturing had always been a hotspot and challenge in the machining industry. Many researchers have conducted relevant research from multiple perspectives and generated fruitful research results. As micro holes drilling technology and tool performance is still the core of micro holes manufacturing at this stage,, this paper summarizes the important technical progress in the field of micro drilling tool manufacturing in recent years. This article focus on the selection of micro drilling tool materials, geometric angle design of micro drilling tools, manufacturing process methods of micro drilling tools, etc. This paper also summarizes the processing parameters of microporous drilling under different materials and working conditions, which can be used as the basis for the selection of processing parameters. © 2023 Editorial Office of Chinese Journal of Mechanical Engineering. All rights reserved.
引用
收藏
页码：265 / 282
页数：17
相关论文
共 84 条
  • [1] YING Junlong, XIONG Xiyao, LI Zhiyong, Research progress and prospect of mico-hole electrochemical machining technologies[J], Electronic and Finishing, 39, 17, pp. 1215-1221, (2020)
  • [2] SHI Hongguo, WANG Fuhai, DING Zhichun, Et al., Research on application of micro-hole drilling technology in processing of aero-engine fuel nozzles[J], Aeronautical Manufacturing Technology, 63, 13, pp. 92-96, (2020)
  • [3] EGASHIRA K，, MIZUTANI K., Micro-drilling of monocrystalline silicon using a cutting tool[J], Precision Engineering, 26, 3, pp. 263-268, (2002)
  • [4] FU W，, HE N, LI L, Et al., Research on micromechanical drilling of micro-hole array in PVC mask[J], Materials Science Forum, 27, 9, pp. 239-243, (2014)
  • [5] EGASHIRA K，, HOSONO S, TAKEMOTO S，, Et al., Fabrication and cutting performance of cemented tungsten carbide micro-cutting tools[J], Precision Engineering, 35, 4, pp. 547-553, (2011)
  • [6] HINDS B K, TREANOR G M., Analysis of stresses in micro-drills using the finite element method[J], International Journal of Machine Tools and Manufacture, 40, 10, pp. 1443-1456, (2000)
  • [7] YANG Xiao, Selection method and diagram of NC drill bits, (2017)
  • [8] HASAN M, ZHAO J, JIANG Z., A review of modern advancements in micro drilling techniques[J], Journal of Manufacturing Processes, 29, pp. 343-375, (2017)
  • [9] AZIZ M, OHNISHI O, ONIKURA H., Advanced burr-free hole machining using newly developed micro compound tool[J], International Journal of Precision Engineering and Manufacturing, 13, 6, pp. 947-953, (2012)
  • [10] OKASHA M M, MATIVENGA P T, DRIVER N, Et al., Sequential laser and mechanical micro-drilling of Ni superalloy for aerospace application[J], CIRP Annals, 59, 1, pp. 199-202, (2010)
123456789