Electrochemical multi-sensors obtained by applying an electric discharge treatment to 3D-printed poly(lactic acid)

被引：1
|
作者：
Fontana-Escartín, Adrián [1 ,2 ]
Lanzalaco, Sonia [1 ]
Bertran, Oscar [1 ]
Alemán, Carlos [1 ,3 ]
机构：
[1] Departament d'Enginyeria Química and Barcelona Research Center in Multiscale Science and Engineering, EEBE, Universitat Politècnica de Catalunya, C/Eduard Maristany, 10-14, Barcelona,08019, Spain
[2] Departament de Física EETAC, Universitat Politècnica de Catalunya, c/Esteve Terrades, 7, Castelldefels,08860, Spain
[3] Institute for Bioengineering of Catalonia (IBEC), The Barcelona Institute of Science and Technology, Baldiri Reixac 10-12, Barcelona,08028, Spain
来源：
Applied Surface Science | 2022年 / 597卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [31] Strength and Hardness of 3D Printed Poly Lactic Acid and Carbon Fiber Poly Lactic Acid Thermoplastics
    Reddy, J. Durga Prasad
    Mishra, Debashis
    Chetty, Nagaraj
    ADVANCES IN LIGHTWEIGHT MATERIALS AND STRUCTURES, ACALMS 2020, 2020, 8 : 625 - 634
  • [32] Poly(lactic acid) and Nanocrystalline Cellulose Methacrylated Particles for Preparation of Cryogelated and 3D-Printed Scaffolds for Tissue Engineering
    Leonovich, Mariia
    Korzhikov-Vlakh, Viktor
    Lavrentieva, Antonina
    Pepelanova, Iliyana
    Korzhikova-Vlakh, Evgenia
    Tennikova, Tatiana
    POLYMERS, 2023, 15 (03)
  • [33] Voltammetric pH Measurements in Unadulterated Foodstuffs, Urine, and Serum with 3D-Printed Graphene/Poly(Lactic Acid) Electrodes
    Rabboh, Fakher M.
    O'Neil, Glen D.
    ANALYTICAL CHEMISTRY, 2020, 92 (22) : 14999 - 15006
  • [34] Mechanical and dimensional performance of poly(lactic acid) 3D-printed parts using thin plate spline interpolation
    Cardoso, Paulo Henrique Machado
    Teixeira, Bruna Nunes
    Calado, Veronica Maria de Araujo
    de Oliveira, Marcia Gomes
    Mendonca, Tiago dos Santos
    Mendonca, Roberta Helena
    de Almeida, Hellen Regina Oliveira
    Cunha, Matheus Santos
    Thire, Rossana Mara da Silva Moreira
    JOURNAL OF APPLIED POLYMER SCIENCE, 2020, 137 (39)
  • [35] Effect of different forms of SiO2 nanoparticles on the performance of 3D-printed Poly(lactic acid) composites
    Ning Ma
    Jiacong Chen
    Ziyang Chen
    Qian Cheng
    Yang Chen
    Juhe Sun
    Journal of Polymer Research, 2025, 32 (5)
  • [36] 3D-printed poly(lactic acid) scaffolds for trabecular bone repair and regeneration: scaffold and native bone characterization
    Velioglu, Zeynep Busra
    Pulat, Deniz
    Demirbakan, Beril
    Ozcan, Burak
    Bayrak, Ece
    Erisken, Cevat
    CONNECTIVE TISSUE RESEARCH, 2019, 60 (03) : 274 - 282
  • [37] Degradation Behavior of 3D-Printed Residue of Astragalus Particle/Poly(Lactic Acid) Biocomposites under Soil Conditions
    Yu, Wangwang
    Shi, Jianan
    Qiu, Rui
    Lei, Wen
    POLYMERS, 2023, 15 (06)
  • [38] Structural mechanics of 3D-printed poly(lactic acid) scaffolds with tetragonal, hexagonal and wheel-like designs
    Liang, Xiangyu
    Gao, Jingming
    Xu, Weike
    Wang, Xiuli
    Shen, Yang
    Tang, Jingyu
    Cui, Shuquan
    Yang, Xiaowei
    Liu, Qingsong
    Yu, Lin
    Ding, Jiandong
    BIOFABRICATION, 2019, 11 (03)
  • [39] Aging effects at room temperature and process parameters on 3D-printed poly (lactic acid) (PLA) tensile properties
    Domerg, Morgane
    Ostre, Benjamin
    Belec, Lenaik
    Berlioz, Sophie
    Joliff, Yoann
    Grunevald, Yves-Henri
    PROGRESS IN ADDITIVE MANUFACTURING, 2024, 9 (06) : 2427 - 2443
  • [40] Preclinical evaluation of a 3D-printed hydroxyapatite/poly(lactic-co-glycolic acid) scaffold for ridge augmentation
    Chang, Po-Chun
    Luo, Hui-Ting
    Lin, Zhi-Jie
    Tai, Wei-Chiu
    Chang, Ching-He
    Chang, Ying-Chieh
    Cochran, David L.
    Chen, Min-Huey
    JOURNAL OF THE FORMOSAN MEDICAL ASSOCIATION, 2021, 120 (04) : 1100 - 1107
12345