Fatigue life estimation of additive manufactured parts in the as-built surface condition

被引：20

作者：

Pegues J.W. ^{[1
,2
]}

Shamsaei N. ^{[1
,2
]}

Roach M.D. ^{[3
]}

Williamson R.S. ^{[3
]}

机构：

[1] Department of Mechanical Engineering, Auburn University, Auburn, AL

[2] National Center for Additive Manufacturing Excellence (NCAME), Auburn University, Auburn, AL

[3] Department of Biomedical Materials Science, University of Mississippi Medical Center, Jackson, MS

来源：

Material Design and Processing Communications | 2019年 / 1卷 / 03期

关键词：

fatigue endurance limit; fatigue strength; laser powder bed fusion; surface roughness; titanium;

D O I：

10.1002/mdp2.36

中图分类号：

学科分类号：

摘要：

In this study, a simple approach for estimating the effect of surface roughness on the fatigue strength of additive manufactured Ti-6Al-4V is investigated. Surface roughness parameters are used to estimate the elastic stress concentration factor and the resulting fatigue stress concentration factor. The estimated fatigue strengths are then compared with experimentally obtained fatigue strengths for specimen batches with varying surface conditions. Results show that the estimated fatigue strengths are comparable with the experimental fatigue strengths, and the predicted stress-life curves fit the experimental data reasonably well. © 2019 John Wiley & Sons, Ltd.

引用

共 50 条

[31] A Predictive Damage-Tolerant Approach for Fatigue Life Estimation of Additive Manufactured Metal Materials
Psihoyos, Harry O.
Lampeas, George N.
METALS, 2023, 13 (06)
[32] Laser surface modification and polishing of additive manufactured metallic parts
Solheid, Juliana dos Santos
Seifert, Hans Juergen
Pfleging, Wilhelm
10TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES [LANE 2018], 2018, 74 : 280 - 284
[33] On the Origin of Enhanced Tempering Resistance of the Laser Additively Manufactured Hot Work Tool Steel in the As-Built Condition
Deirmina, Faraz
Amirabdollahian, Sasan
Lindwall, Greta
Molinari, Alberto
Tiwari, Jitendar Kumar
Hryha, Eduard
Pellizzari, Massimo
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2025, 56 (01): : 88 - 110
[34] Effects of as-built surface with varying number of contour passes on high-cycle fatigue behavior of additively manufactured nickel alloy 718
Kafka, Orion L.
Benzing, Jake
Derimow, Nicholas
Schumacher, Philipp
Koepke, Lucas
Beamer, Chad
Godfrey, Donald
Hrabe, Nikolas
INTERNATIONAL JOURNAL OF FATIGUE, 2023, 176
[35] A METHOD TO PREDICT FATIGUE LIFE OF ADDITIVELY MANUFACTURED METALLIC PARTS
Zhu, Hanyu
Zhao, Nanzhu
Patil, Sandeep
Bhasin, Amit
Li, Wei
PROCEEDINGS OF THE ASME 2021 16TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE (MSEC2021), VOL 1, 2021,
[36] Surface Treatment of Powder-Bed Fusion Additive Manufactured Metals for Improved Fatigue Life
Witkin, David B.
Patel, Dhruv N.
Helvajian, Henry
Steffeney, Lee
Diaz, Agustin
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (02) : 681 - 692
[37] Surface Treatment of Powder-Bed Fusion Additive Manufactured Metals for Improved Fatigue Life
David B. Witkin
Dhruv N. Patel
Henry Helvajian
Lee Steffeney
Agustin Diaz
Journal of Materials Engineering and Performance, 2019, 28 : 681 - 692
[38] Comparative tribological studies of additive manufactured as-built and chemically polished AlSi10Mg alloy surfaces
Srinivas, Ms
Pandey, D.
Prasad, Ts
Purushothaman, S.
Sankar, M. r
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2024,
[39] Effect of Cut-Off, Evaluation Length, and Measurement Area in Profile and Areal Surface Texture Characterization of As-Built Metal Additive Manufactured Components
Nagalingam, Arun Prasanth
Vohra, Moiz Sabbir
Kapur, Pulkit
Yeo, Swee Hock
APPLIED SCIENCES-BASEL, 2021, 11 (11):
[40] Ultrasonic fatigue testing in as-built and polished Ti6Al4V alloy manufactured by SLM
da Costa, Pedro R.
Sardinha, Manuel
Reis, Luis
Freitas, Manuel
Fonte, Manuel
FORCES IN MECHANICS, 2021, 4

← 1 2 3 4 5 →