Effect of Phosphorous Calcined Gypsum on Shrinkage Characteristics of Calcium Sulfoaluminate Cement Clinker

被引：0
|
作者：
Huang H. [1 ,2 ]
Liao Y. [1 ,3 ]
Jiang G. [1 ]
Liao G. [1 ,3 ]
Mei J. [1 ,3 ]
机构：
[1] School of Urban Construction, Wuhan University of Science and Technology, Wuhan
[2] China First Metallurgical Group Company Limited, Wuhan
[3] Institute of High Performance Engineering Structure, Wuhan University of Science and Technology, Wuhan
来源：
Jianzhu Cailiao Xuebao/Journal of Building Materials | 2022年 / 25卷 / 09期
关键词：
autogenous shrinkage; chemical shrinkage; drying shrinkage; internal relative humidity; phosphorous calcined gypsum（PCG）;
D O I：
10.3969/j.issn.1007-9629.2022.09.002
中图分类号：
学科分类号：
摘要：
The setting time， chemical shrinkage， autogenous shrinkage， internal relative humidity and drying shrinkage of calcium sulfoaluminate （CSA） cement clinker blended with different amounts of phosphorous calcined gypsum （PCG） were investigated. The results show that the setting time of paste is shortened significantly with the increase of PCG content， and the rate of chemical shrinkage and the internal relative humidity of the paste is decreased gradually. The autogenous shrinkage has a good relationship with the internal relative humidity of the paste. The stable stage of chemical shrinkage is accelerated when the content of PCG is not more than 25%. When the content of PCG is 25% to 30%, the CSA cement paste expanded during the autogenous shrinkage test and the drying shrinkage of CSA cement clinker pastes are less than the control sample. © 2022 Tongji University. All rights reserved.
引用
收藏
页码：893 / 900
页数：7
相关论文
共 28 条
  • [1] LIN Zongshou, Cementitious material science, (2018)
  • [2] Linglin XU, ZHOU Xiangyi, Nan LI, Impact of calcium sulfate on hydration features of calcium sulfoaluminate cement［J］, Journal of Tongji University （Natural Science）, 45, 6, (2017)
  • [3] BULLERJAHN F, SKOCEK J, HAHA M B, Chemical shrinkage of ye’elimite with and without gypsum addition［J］, Construction and Building Materials, 200, (2019)
  • [4] WINNEFELD F, MARTIN L H J, MULLER C J, Using gypsum to control hydration kinetics of CSA cements［J］, Construction and Building Materials, 155, (2017)
  • [5] YANG Zhiqiang, CHEN Qing, GUO Qingchun, Current status and prospects on utilization of phosphogypsum in cement production［J］, Bulletin of the Chinese Ceramic Society, 35, 9, pp. 2860-2865, (2016)
  • [6] ISLAM G, CHOWDHURY F H, RAIHAN M T, Effect of phosphogypsum on the properties of portland cement［J］, Procedia Engineering, 171, (2017)
  • [7] HUANG Y B, QIAN J S, LIU C Z, Influence of phosphorus impurities on the performances of calcium sulfoaluminate cement［J］, Construction and Building Materials, 149, (2017)
  • [8] Baoguo MA, Penghui HU, Ying SU, Study on setting time and strength control of phosphorus building gypsum［J］, Bulletin of the Chinese Ceramic Society, 38, 10, pp. 3047-3053, (2019)
  • [9] MIN C D, SHI Y, LIU Z X, Properties of cemented phosphogypsum （PG） backfill in case of partially substitution of composite Portland cement by ground granulated blast furnace slag［J］, Construction and Building Materials, 305, (2021)
  • [10] SHEN Y, QIAN J S, CHAI J Q, Calcium sulphoaluminate cements made with phosphogypsum：Production issues and material properties［J］, Cement and Concrete Composites, 48, (2014)
123