Statistical distribution pattern of strength and microstructural damage analysis of unidirectional fiber bundle SiC/SiC composites

被引：0

作者：

Zhang C. ^{[1
]}

Sun G. ^{[1
]}

Lei B. ^{[2
]}

Li X. ^{[3
]}

Zhang Q. ^{[4
]}

Meng Z. ^{[4
,5
]}

Gao X. ^{[4
]}

机构：

[1] School of Materials Science and Engineering, Chang'an University, Xi'an

[2] China Academy of Launch Vehicle Technology, Beijing

[3] School of Materials and Environmental Engineering, Chengdu Technological University, Chengdu

[4] Science and Technology on Thermostructural Composite Materials Laboratory, Northwestern Polytechnical University, Xi'an

[5] School of Materials Engineering, Xi'an Aeronautical Institute, Xi'an

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2023年 / 40卷 / 07期

基金：

中国国家自然科学基金;

关键词：

deep learning; microstructure; tensile property; unidirectional fiber bundle SiC/SiC; Weibull distribution;

D O I：

10.13801/j.cnki.fhclxb.20230217.004

中图分类号：

学科分类号：

摘要：

The discrete mechanical properties of SiC/SiC composites originate from their structural units and microstructural features. In this paper, for the unidirectional fiber bundle SiC/SiC composites with the simplest structure, the strength distribution pattern was analyzed by the two-parameter Weibull distribution and the median estimated distribution, and the discrete nature was revealed based on the deep learning of the microstructure of each group element (matrix, interface phase, and fiber) of the composites. The results show that the tensile strengths of the unidirectional fiber bundle SiC/SiC prepared in the small and medium test furnaces are located at (331.02 MPa, 407.82 MPa) and (161.09 MPa, 540.95 MPa), respectively. The former Weibull modulus (20.59) is 75.7% higher than the latter (5.01), indicating an increase in the dispersion of the medium test. The results of deep learning of fracture morphology show that matrix cracking, interface deflection and fiber fracture pullout are the main failure mechanisms, and due to the distribution of matrix crack spacing at (83.2 µm, 107.8 µm), the calculation by the micromechanical equation indicates that matrix nonuniformity is the main reason affecting the reliability of the composites. © 2023 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.

引用

页码：4210 / 4225

页数：15

共 21 条

[11] LI Xiangjun, LI Yanbin, GUO Fei, Et al., Compression strength distribution and reliability assessment of C/C composites, Acta Aeronautica et Astronautica Sinica, 40, 8, pp. 122-130, (2019)
[12] HAN Xuxu, ZHANG Chengyu, CHEN Bo, Et al., Statistical distribution of tensile strength of a 2D-SiC<sub>f</sub>/SiC composite, Acta Materiae Compositae Sinica, 36, 2, pp. 434-440, (2019)
[13] LI Hui, ZHANG Litong, ZENG Qingfeng, Et al., Reliability analysis of 2D C/SiC composite[J], Acta Materiae Compositae Sinica, 24, 4, pp. 95-100, (2007)
[14] TAO Yongqiang, JIAO Guiqiong, WANG Bo, Et al., Stress-strain behavior in 2D weave ceramic matrix composite: Analysis predictions[J], Engineering Mechanics, 26, 10, pp. 221-227, (2009)
[15] CURTIN W A, AHN B K, TAKEDA N., Modeling brittle and tough stress-strain behavior in unidirectional ceramic matrix composites, Acta Materialia, 46, 10, pp. 3409-3420, (1998)
[16] MENG Zhixin, CHANG Ke, GUO Xu, Et al., Study on tensile strenght and tensile behavior of SiC ceramic matrix composites under different fiber bundles, Journal of Xi'an Aeronautical University, 37, 5, pp. 35-42, (2019)
[17] VAGAGGINI E, DOMERGUE J, EVANS A G., Relationships between hysteresis measurements and the constituent properties of ceramic matrix composites: I, theory[J], Journal of the American Ceramic Society, 78, 10, pp. 2709-2720, (1995)
[18] MA X, YIN X, CAO X, Et al., Effect of heat treatment on the mechanical properties of SiC<sub>f</sub>/BN/SiC fabricated by CVI[J], Ceramics International, 42, 2, pp. 3652-3658, (2016)
[19] Mechanical properties of unidirectional fiber-reinforced composites: GB/T 1040.5− 2008, (2008)
[20] GAO X Y, LEI B, ZHANG Y, Et al., Identification of micro-structures and damages in silicon carbide ceramic matrix composites by deep learning[J], Materials Characterization, 196, (2023)

← 1 2 3 →