Impact of the Flicker Noise on the Ring Oscillator-based TRNGs

Ring Oscillators (RO) are often used in true random number generators (TRNG). Their jittered clock signal, used as randomness source, originates from thermal and flicker noises. While thermal noise jitter is generally used as the main source of randomness, flicker noise jitter is not due to its autocorrelation. This work aims at qualitatively settling the issue of the influence of flicker noise in TRNGs, as its impact increases in newer technology nodes. For this, we built a RO behavioural model, which generates time series equivalent to a jittered RO signal. It is then used to generate the output of an elementary RO-TRNG. Despite general expectations, the autocorrelation inside the output bit stream is reduced when the amplitude of flicker noise increases. The model shows that this effect is caused by the sampling of the jittered signal by the second oscillator, which hides the behaviour of the absolute jitter, causes resetting of the perceived phase, and suppresses any memory effect. The inclusion of flicker noise as a legitimate noise source can increase the TRNG output bit rate by a factor of four for the same output entropy rate. This observation opens new perspectives towards more efficient stochastic models of the RO-TRNGs. © 2024, Ruhr-University of Bochum. All rights reserved.