Prediction and Optimization Method of Energy Absorption Characteristics of Thin-walled Metal Circular Pipe Filled with Aluminum Foam

被引：0
|
作者：
Yan S. [1 ]
Jiang Y. [1 ]
Deng Y. [1 ]
Wen X. [1 ]
机构：
[1] School of Aerospace Engineering, Beijing Institute of Technology, Beijing
来源：
Binggong Xuebao/Acta Armamentarii | 2024年 / 45卷 / 06期
关键词：
aluminum foam; approximate model; energy absorption characteristics; radial basis function neural network; structure optimization;
D O I：
10.12382/bgxb.2023.0366
中图分类号：
学科分类号：
摘要：
In order to improve the energy absorption characteristics of aluminum foam-filled thin-walled metal circular tube and realize high-efficiency structural design, an approximate model of the energy absorption characteristics of aluminum foam-filled aluminum tube under axial impact is established based on the uniform Latin hypercube design method and radial basis neural network, and it is embedded into the genetic algorithm to realize the structural optimization of components. The results show that the goodness of fit of the approximate model based on the radial basis neural network is greater than 0. 99, the root mean square error is less than 0. 08, and the calculation time of the approximate model is only 0. 56% of the numerical calculation. The approximate model can greatly improve the calculation efficiency while ensuring higher accuracy. Through the optimization of the structure of aluminum foam-filled aluminum tube, it is found that the average compression force of aluminum foam-filled aluminum tube can be maximized by increasing the radius and wall thickness of the circular tube and reducing the height, and on the contrary, its peak compression force can be minimized. The multi-objective optimization based on the genetic algorithm significantly improves the energy absorption characteristics of aluminum foam-filled aluminum tube. The research results can provide a reference for the rapid design and optimization of aluminum foam-filled thin-walled metal circular tube. © 2024 China Ordnance Industry Corporation. All rights reserved.
引用
收藏
页码：1954 / 1964
页数：10
相关论文
共 34 条
  • [11] MOVAHEDI N, LINUL E., Quasi-static compressive behavior of the ex-situ aluminum-alloy foam-filled tubes under elevated temperature conditions, Materials Letters, 206, pp. 182-184, (2017)
  • [12] ZHOU H G, FAN J L, WANG X J, Et al., Energy absorption of foam concrete filled aluminum tube compsite cladding, Acta Materiae Compositae Sinica, 40, 5, pp. 2885-2896, (2023)
  • [13] GAN N F, WANG D H, FENG Y N, Et al., numerical simulation and experimental verification of energy absorption performance of PU foam filled CFRP cone tubes, China Mechanical Engineering, 29, 5, pp. 609-615, (2018)
  • [14] JI C, HUANG H G, WANG T, Et al., Recent advances and future trends in processing methods and characterization technologies of aluminum foam composite structures: a review, Journal of Manufacturing Processes, 93, pp. 116-152, (2023)
  • [15] LIU X F, HE X M., Study on mechanical properties of gradient aluminum foam under low strain rate loading, Materials Reports, 37, 7, pp. 198-204, (2023)
  • [16] LIU S B, LI A Q, XUAN P., Mechanical behavior of aluminum foam / polyurethane interpenetrating phase composites under monotonic and cyclic compression, Composites Part A: Applied Science and Manufacturing, 116, pp. 87-97, (2019)
  • [17] CAO X M, JIN P, XU Y C, Et al., Structural feature and reinforcement mechanism of silicon carbide ceramics aluminum matrix co-continuous phase composites, Acta Materiae Compositae Sinica, 39, 4, pp. 1771-1777, (2022)
  • [18] ELAHI S A, BOUZEGAR J, NIKNEJAD A, Et al., Theoretical study of absorbed energy by empty and foam-filled composite tubes under lateral compression, Thin-Walled Structures, 114, pp. 1-10, (2017)
  • [19] WANG Y H, LIEW J Y R, LEE S C, Et al., Experimental and analytical studies of a novel aluminum foam filled energy absorption connector under quasi-static compression loading, Engineering Structures, 131, pp. 136-147, (2017)
  • [20] ZHANG C Y, LIU Z F., Dynamic response of aluminum foam filled pipes under lateral explosive load, Chinese Journal of High Pressure Physics, 35, 6, pp. 134-144, (2021)
1234