BUCKLING TEST ON 3D-PRINTED LATTICED CYLINDERS OF ALUMINUM ALLOY FOR AXIAL COMPRESSION

被引：0
|
作者：
Uchida K. [1 ]
Yamashita T. [2 ]
机构：
[1] School of Architecture, Kogakuin Univ.
来源：
AIJ Journal of Technology and Design | 2022年 / 28卷 / 70期
关键词：
3D printer; Aluminum alloy; Buckling test; Elephant-leg buckling; Latticed cylinder;
D O I：
10.3130/aijt.28.1172
中图分类号：
学科分类号：
摘要：
Two latticed cylinders of aluminum alloy were 3D-printed and axially compressed to cause elephant-leg buckling. The cylinders were composed of triangular and hexagonal grids. 3D scan was performed to specify the real dimensions of the manufactured cylinders. To perform FE analysis composed of beam-elements, center line-models were extracted from the 3D scanned model using the Rhinoceros+Grasshopper functions. Initial geometric imperfection was specified as well as actual section dimensions. FE analysis and strength evaluation was carried out for comparison and verification on the test results. © 2022 Architectural Institute of Japan. All rights reserved.
引用
收藏
页码：1172 / 1177
页数：5
相关论文
共 50 条
  • [41] Fatigue Life Improvement of 3D-Printed Aluminum by Electroplating with Nickel
    Tezel, Tugce
    JOM, 2022, 74 (03) : 748 - 754
  • [42] Fatigue Life Improvement of 3D-Printed Aluminum by Electroplating with Nickel
    Tugce Tezel
    JOM, 2022, 74 : 748 - 754
  • [43] Nonlinear wave propagation in 3D-printed graded lattices of hollow elliptical cylinders
    Kim, Hyunryung
    Kim, Eunho
    Yang, Jinkyu
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2019, 125 : 774 - 784
  • [44] The Effects of Graphene on the Biocompatibility of a 3D-Printed Porous Titanium Alloy
    Sun, Xu
    Tong, Shuang
    Yang, Shude
    Guo, Shu
    COATINGS, 2021, 11 (12)
  • [45] Buckling characteristics of cross-ply elliptical cylinders under axial compression
    Sambandam, CT
    Patel, BP
    Gupta, SS
    Munot, CS
    Ganapathi, M
    COMPOSITE STRUCTURES, 2003, 62 (01) : 7 - 17
  • [46] Buckling Analysis of Carbon Fiber Reinforced Plastics Cylinders under Axial Compression
    Huang, Da
    Duan, Chenghong
    ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2, 2013, 395-396 : 76 - 79
  • [47] BUCKLING ANALYSIS OF GEOMETRICALLY IMPERFECT STIFFENED CYLINDERS UNDER AXIAL-COMPRESSION
    SHEINMAN, I
    SIMITSES, GJ
    AIAA JOURNAL, 1977, 15 (03) : 374 - 382
  • [48] A 3D-Printed Monolithic Inline Filter Fabricated With Titanium Alloy
    Mostaani, Abolfazl
    Skaik, Talal
    Mohamed, Abd El-Moez A.
    Attallah, Moataz M.
    Booth, Paul
    Miquel-Espana, Cesar
    Wang, Yi
    2023 SBMO/IEEE MTT-S INTERNATIONAL MICROWAVE AND OPTOELECTRONICS CONFERENCE, IMOC, 2023, : 58 - 60
  • [49] Buckling behaviour of extensively-welded steel cylinders under axial compression
    Lin, X
    Teng, JG
    ADVANCES IN STEEL STRUCTURES, VOLS I & II, PROCEEDINGS, 2002, : 737 - 744
  • [50] BUCKLING OF ELASTIC-PLASTIC DISCRETELY STIFFENED CYLINDERS IN AXIAL-COMPRESSION
    REDDY, BD
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1980, 16 (04) : 313 - 328
12345