Numerical simulation of material flow and heat transfer characteristics of cement rotary kiln

被引：0
|
作者：
Liu B. [1 ]
Zhou W. [1 ]
Zhao P. [1 ]
Li R. [1 ]
机构：
[1] School of Electrical Engineering, Yanshan University, Qinhuangdao
来源：
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) | 2019年 / 50卷 / 05期
基金：
中国国家自然科学基金;
关键词：
Coal combustion; Computational fluid dynamites(CFD); Heat transfer; Multiphase flow; Numerical simulation;
D O I：
10.11817/j.issn.1672-7207.2019.05.028
中图分类号：
学科分类号：
摘要：
According to the analysis of material movement and heat transfer characteristics in the process of pulverized coal combustion, the rotary kiln was considered as a calculation field composed of high-temperature flue gas flow and material flow, which were coupled with each other. Based on heat transfer on the wall surface, heat flow equation was used to describe heat flux of the material through kiln wall. A heat transfer model with heat transfer compensation was proposed to describe the heat transfer between material and high-temperature flue gas. This model was used to simulate the combustion of pulverized coal, material flow and sintering in the rotary kiln. In addition, flow and temperature distribution of the material under different working conditions were studied. The results show that the heat transfer and movement of the material in the rotary kiln can be accurately reflected by the model. The increase of the rotational speed improves the axial acceleration of the material in the rotary kiln. The increase of material flow rate in the rotary kiln results in the decrease of the temperature of the material, but improves the temperature difference between surface material and internal material. The increase of the material filling rate enlarges the area of the outer recirculation zone and improves the temperature of cooling zone. When the material filling rate reaches 12%, Coanda effect will be induced, causing the rotary kiln flame shift toward material direction near the material area. © 2019, Central South University Press. All right reserved.
引用
收藏
页码：1235 / 1243
页数：8
相关论文
共 20 条
  • [11] Yin H., Zhang M., Liu H., Numerical simulation of three-dimensional unsteady granular flows in rotary kiln, Powder Technology, 253, 2, pp. 138-145, (2014)
  • [12] Yin H., Shen C., Liu H., Et al., Calculation of cold jet and gas-solid two phase flow in rotary kiln, Journal of the Chinese Ceramic Society, 11, pp. 1527-1533, (2013)
  • [13] Ma A., Zhou J., Ou J., Et al., CFD prediction of physical field for multi-air channel pulverized coal burner in rotary kiln, Journal of Central South University of Technology, 13, 1, pp. 75-79, (2006)
  • [14] Klimanek A., Adamczyk W., Katelbach-Wozniak A., Et al., Towards a hybrid Eulerian-Lagrangian CFD modeling of coal gasification in a circulating fluidized bed reactor, Fuel, 152, pp. 131-137, (2015)
  • [15] Delele M.A., Weigler F., Franke G., Et al., Studying the solids and fluid flow behavior in rotary drums based on a multiphase CFD model, Powder Technology, 292, pp. 260-271, (2016)
  • [16] Wen X., Luo Y., Luo K., Et al., LES of pulverized coal combustion with a multi-regime flamelet model, Fuel, 188, pp. 661-671, (2017)
  • [17] Marias F., Roustan H., Pichat A., Coupling between CFD and a bed model in a rotary kiln: application to the processing of aluminium waste, Progress in Computational Fluid Dynamics An International Journal, 7, 1, pp. 40-50, (2007)
  • [18] Wang C., Chen W., Jia F., Et al., Numerical simulation of heat transfer and combustion in carbon rotary kiln, Journal of Chemical Industry and Engineering(China), 61, 6, pp. 1379-1384, (2010)
  • [19] Mujumdar K.S., Ranade V.V., CFD modeling of rotary cement kilns, Asia-Pacific Journal of Chemical Engineering, 3, 2, pp. 106-118, (2010)
  • [20] Mujumdar K.S., Ganesh K.V., Kulkarni S.B., Et al., Rotary cement kiln simulator (RoCKS): Integrated modeling of pre-heater, calciner, kiln and clinker cooler, Chemical Engineering Science, 62, 9, pp. 2590-2607, (2007)
12