Theoretical and Experimental Research of BNES in Torsional Vibration Suppression of Rotor Systems

被引:0
|
作者
Dou J.-X. [1 ]
Yao H.-L. [1 ]
Cao Y.-B. [1 ]
Guo Y.-L. [1 ]
机构
[1] School of Mechanical Engineering & Automation, Northeastern University, Shenyang
关键词
bi-stability; nonlinear energy sink (NES); rotor system; torsional vibration; vibration suppression;
D O I
10.12068/j.issn.1005-3026.2023.06.005
中图分类号
学科分类号
摘要
A bi-stable nonlinear energy sink (BNES) is proposed to suppress the torsional vibration of rotor systems. Firstly, the structure and working principles of BNES are introduced, and the dynamic equation of the rotor-BNES system is established. Then, the vibration suppression performance of BNES under transient and steady-state excitation is studied by the numerical calculation method, and compared with the linear dynamic vibration absorber(LDVA) with the same moment of inertia. Finally, a test platform is built to verify the capacity of BNES to suppress the torsional vibration of the rotor system. It is shown that the proposed BNES has a good vibration suppression effect on the transient response and steady-state response of the rotor system, and under the given parameters, the vibration suppression performance of BNES is better than that of LDVA. © 2023 Northeastern University. All rights reserved.
引用
收藏
页码:790 / 798
页数:8
相关论文
共 18 条
  • [11] Bab S, Khadem S E, Shahgholi M, Et al., Vibration attenuation of a continuous rotor-blisk-journal bearing system employing smooth nonlinear energy sinks[J], Mechanical Systems and Signal Processing, 84, pp. 128-157, (2017)
  • [12] Cao Yan-bo, Li Zhi-ao, Han Jin-chao, Et al., Application of non-smooth NES in vibration suppression of rotor-blade systems[ J], Journal of Northeastern University (Natural Science), 41, 8, pp. 1103-1110, (2020)
  • [13] Yao H L, Wang Y W, Xie L Q, Et al., Bi-stable buckled beam nonlinear energy sink applied to rotor system[J], Mechanical Systems and Signal Processing, 138, (2020)
  • [14] Huang X, Yang B., Investigation on the energy trapping and conversion performances of a multi-stable vibration absorber [J], Mechanical Systems and Signal Processing, 160, 4, (2021)
  • [15] Rezaei M, Talebitooti R, Liao W H., Exploiting bi-stable magneto-piezoelastic absorber for simultaneous energy harvesting and vibration mitigation[J], International Journal of Mechanical Sciences, 207, (2021)
  • [16] Haris A, Motato E, Mohammadpour M, Et al., On the effect of multiple parallel nonlinear absorbers in palliation of torsional response of automotive drivetrain [ J], International Journal of Non-linear Mechanics, 96, pp. 22-35, (2017)
  • [17] Haris A, Alevras P, Mohammadpour M, Et al., Design and validation of a nonlinear vibration absorber to attenuate torsional oscillations of propulsion systems [ J], Nonlinear Dynamics, 100, pp. 33-49, (2020)
  • [18] Liu C, Zhao R, Yu K, Et al., In-plane quasi-zero-stiffness vibration isolator using magnetic interaction and cables: theoretical and experimental study[ J], Applied Mathematical Modelling, 96, pp. 497-522, (2021)