Dry Sliding Wear Behaviour of Al6061-Reinforcement with Graphite and Palm Stalk Ash

被引：0
|
作者：
Nithyanandhan T. [1 ]
Mohanraj N. [1 ]
Sureshkumar P. [2 ]
Sanjeev [1 ]
机构：
[1] Dept. of Mech. Engg, Sri Krishna College of Tech, Tamil Nadu, Coimbatore
[2] Dept. of Mech. Engg, JCT College of Engg. & Tech, Tamil Nadu, Coimbatore
来源：
International Journal of Vehicle Structures and Systems | 2023年 / 15卷 / 01期
关键词：
Al6061; Graphite; Palm stalk ash; Pin on disc; Wear;
D O I：
10.4273/ijvss.15.1.13
中图分类号：
学科分类号：
摘要：
In this research an attempt is made to improve and to examine the wear behaviour of AL6061 composite with two different fillers such as graphite by adding the reinforcement particles of palm stalk ashes. AL6061 composite is developed on a metal matrix composite with the weight percentage of graphite (0.7 %) which is kept constant for all specimens and the reinforcement of palm stalk ash is varied as a percentage of weight (0.7%, 1.4%, 2.1%, 2.8% and 3.5%). Reinforced composites were preheated in the electrical furnace at 150°C for about an hour to remove the moisture. The reinforcement was added into molten aluminium into the stir casting furnace. The wear behaviour and corrosion rate of fabricated AL6061 metal composite reinforced with different dissipate materials were studied. © 2023. Carbon Magics Ltd.
引用
收藏
页码：69 / 72
页数：3
相关论文
共 50 条
  • [41] Analysis of Dry Sliding Wear Behaviour of Aluminium-Fly Ash Composites: The Taguchi Approach
    Palanisamy, Shanmughasundaram
    Ramanathan, Subramanian
    Rangaraj, Ravikumar
    ADVANCES IN MECHANICAL ENGINEERING, 2013,
  • [42] Fabrication and dry sliding wear study of Al6061/mussel-shell particulate composites
    Dwiwedi, Surendra Kumar
    Srivastava, Ashok Kumar
    Chopkar, Manoj
    SN APPLIED SCIENCES, 2019, 1 (07):
  • [43] Fabrication and dry sliding wear study of Al6061/mussel-shell particulate composites
    Surendra Kumar Dwiwedi
    Ashok Kumar Srivastava
    Manoj Chopkar
    SN Applied Sciences, 2019, 1
  • [44] Investigations on the influence of graphite filler on dry sliding wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites
    Suresha, B.
    Siddaramaiah
    Kishore
    Seetharamu, S.
    Kumaran, P. Sampath
    WEAR, 2009, 267 (9-10) : 1405 - 1414
  • [45] Studies on the dry sliding wear behaviour of hypoeutectic and eutectic Al-Si alloys
    Kori, S. A.
    Chandrashekharaiah, T. M.
    WEAR, 2007, 263 (745-755) : 745 - 755
  • [46] Dry sliding wear of eutectic Al–Si
    I. Baker
    Y. Sun
    F. E. Kennedy
    P. R. Munroe
    Journal of Materials Science, 2010, 45 : 969 - 978
  • [47] Wear mechanism of Al-Si alloy impregnated graphite composite under dry sliding
    Goto, H
    Uchijo, K
    WEAR, 2005, 259 (1-6) : 613 - 619
  • [48] Effect of Bagasse ash reinforcement on the wear behaviour of Al-Cu-Mg/Bagasse ash particulate composites
    V.S. Aigbodion
    S.B. Hassan
    G.B. Nyior
    T. Ause
    Acta Metallurgica Sinica(English Letters), 2010, 23 (02) : 81 - 89
  • [49] Effect of Bagasse ash reinforcement on the wear behaviour of Al-Cu-Mg/Bagasse ash particulate composites
    Aigbodion, V. S.
    Hassan, S. B.
    Nyior, G. B.
    Ause, T.
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2010, 23 (02) : 81 - 89
  • [50] Adaptive Neural network for estimation of sliding wear behaviour of Al6061-Carbon fiber Composites
    Ramesh, C. S.
    Mohan, Nirupama
    Jain, V. K. S.
    Gudi, Harsha R.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 1267 - +
12345