Running-in of a double network gel for low friction in water

被引：0
|
作者：
Kanda K. [1 ]
Adachi K. [1 ]
机构：
[1] Department of Mechanical Systems Engineering, Tohoku University, 6-6-01 Aramaki-Aza-Aoba Aoba-ku, Sendai, , Miyagi
来源：
Tribology Online | 2021年 / 16卷 / 03期
关键词：
Damaged zone; Double network gel; Low friction; Self-formation;
D O I：
10.2474/TROL.16.170
中图分类号：
学科分类号：
摘要：
This study aims to clarify the potential of double network (DN) gel to realize low friction coefficient under water lubrication environment. Friction tests were carried out by using DN gel film and silicon carbide (SiC) disk in water. DN gel shows running-in behavior consists of lowering friction coefficient twice, then friction coefficient shows less than 0.001 under limited experimental conditions. By introducing in-situ test apparatus, self-formation of damaged region is confirmed and external water penetrates into self-formed damaged region. As a result, damaged region becomes water-rich situation more and more and formation of lubricious water layer is enhanced gradually. Thus running-in behavior occurs by friction system using DN gel. Copyright © 2021 Japanese Society of Tribologists
引用
收藏
页码：170 / 177
页数：7
相关论文
共 50 条
  • [21] Variation of load for the improvement of the running-in behaviour of dry-running friction pairings
    Klotz, Thomas
    Bause, Katharina
    Ott, Sascha
    Albers, Albert
    FORSCHUNG IM INGENIEURWESEN-ENGINEERING RESEARCH, 2021, 85 (04): : 871 - 880
  • [22] Extreme friction reductions during initial running-in of W-S-C-Ti low-friction coatings
    Nyberg, H.
    Sundberg, J.
    Sarhammar, E.
    Gustavsson, F.
    Kubart, T.
    Nyberg, T.
    Jansson, U.
    Jacobson, S.
    WEAR, 2013, 302 (1-2) : 987 - 997
  • [23] Heating Performance Research in the Running-in Process of Wet Friction Clutch
    Liu Yufei
    Bai Xiuchao
    Li Xin
    Lei Yongliang
    INTERNATIONAL CONFERENCE MACHINERY, ELECTRONICS AND CONTROL SIMULATION, 2014, 614 : 12 - 15
  • [24] Improving the efficiency of running-in for a bronze–stainless steel friction pair
    R. W. Maruda
    E. E. Feldshtein
    S. Legutko
    G. M. Królczyk
    Journal of Friction and Wear, 2015, 36 : 548 - 553
  • [25] Influence of tribofilms on failures and friction of gears with particular focus on running-in
    Ziegltrum, Andreas
    Emrich, Stefan
    Lohner, Thomas
    Michaelis, Klaus
    Brodyanski, Alexander
    Merz, Rolf
    Kopnarski, Michael
    Hoehn, Bernd-Robert
    Stahl, Karsten
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2019, 71 (08) : 1017 - 1026
  • [26] Experimental prediction model for the running-in state of a friction system based on chaotic characteristics and BP neural network
    Ding, Cong
    Feng, Shiqing
    Qiao, Zhizhao
    Zhu, Hua
    Zhou, Zhenyu
    Piao, Zhongyu
    TRIBOLOGY INTERNATIONAL, 2023, 188
  • [27] Investigation of ultra-low friction between self-mated Si3N4 in water after running-in
    Guo, Fei
    Wang, Zixi
    Liu, Ying
    Wang, Yuming
    Tian, Yu
    TRIBOLOGY INTERNATIONAL, 2017, 115 : 365 - 369
  • [28] Computer simulation of running-in to double circular arc gears
    Jisuanji Yanjiu yu Fazhan/Computer Research and Development, 1997, 34 (02): : 9 - 14
  • [29] Running-in for Low Friction between Silicon-Containing Aluminum Alloy and Bearing Steel in Engine Oil
    Ihara, Kento
    Adachi, Koshi
    TRIBOLOGY ONLINE, 2023, 18 (04): : 115 - 124
  • [30] A Hybrid Model for the Evolution of Liquid Lubrication Aimed at Achieving Ultra-Low Friction during Running-In
    Fang Y.
    Ma L.
    Mocaxue Xuebao/Tribology, 2022, 42 (06): : 1138 - 1147
12345