Electro-hydraulic Brake Control for Improved Ride Comfort in Four-wheel-independently-actuated Electric Vehicles

被引：0
|
作者：
Zhang L. [1 ,2 ]
Liu Q. [1 ,2 ]
Wang Z. [1 ,2 ]
机构：
[1] Collaborative Innovation Center for Electric Vehicles in Beijing, Beijing Institute of Technology, Beijing
[2] National Engineering Laboratory for Electric Vehicles, Beijing Institute of Technology, Beijing
来源：
Wang, Zhenpo (wangzhenpo@bit.edu.cn) | 1600年 / Chinese Mechanical Engineering Society卷 / 56期
关键词：
Electro-hydraulic brake; Fuzzy control; Ride-comfort-enabled strategy; Wheel cylinder pressure control;
D O I：
10.3901/JME.2020.24.125
中图分类号：
学科分类号：
摘要：
The time domain response difference between the hydraulic and the electric brake often causes shocks during the brake mode switching process in between for electric vehicles (EVs), which would significantly compromise ride comfort. A ride-comfort-enabled strategy that consists of an upper and a lower controller is proposed for electro-hydraulic-combined brake system in a four-wheel-independently-actuated electric vehicle (FWIA EV). In the upper controller, a wheel cylinder pressure control strategy based on fuzzy control is proposed for an electro-hydraulic brake system (EHB) composed of a high-pressure accumulator and a motor pump. In order to tackle with the impact caused by brake mode switching, a ride-comfort-enabled strategy is proposed in the lower layer. It incorporates a hydraulic intervention prediction module and an electric brake compensation module. Finally, the proposed strategy is examined under various brake scenarios in Simulink-AMESim joint simulation. The results show that the wheel cylinder pressure can precisely track the target pressure with a steady-state error of less than 2% under different brake demands. The brake response is guaranteed and the impact during the brake mode switching process is significantly reduced under the proposed control strategy, thus achieving improved brake performance and ride comfort. © 2020 Journal of Mechanical Engineering.
引用
收藏
页码：125 / 134
页数：9
相关论文
共 16 条
  • [11] MUTOH N, TAKITA K., A control method to suitably distribute electric braking force between front and rear wheels in electric vehicle systems with independently driven front and rear wheels, Conference Record of the IAS Annual Meeting, pp. 2746-2753, (2004)
  • [12] YU Zhuoping, SHI Biaofei, XIONG Lu, Et al., Coordination control of hybrid braking based on integrated-electro-hydraulic brake system, Journal of Tongji University, 47, 6, pp. 851-856, (2019)
  • [13] CHIARA F, CANOVA M., A review of energy consumption, management, and recovery in automotive systems, with considerations of future trends, Proceedings of the Institution of Mechanical Engineers, 227, 6, pp. 914-936, (2013)
  • [14] NUMASATO H, TOMIZUKA M., Settling control and performance of a dual-actuator system for hard disk drives, IEEE/ASME transactions on mechatronics, 8, 4, pp. 431-438, (2003)
  • [15] ZHU Zhiting, YU Zhuoping, XIONG Lu, Coordination control strategy of electric vehicle hybrid brake system in transient conditions, Journal of Harbin Engineering University, 35, 9, pp. 1135-1141, (2014)
  • [16] FU Xiaodan, LUO Yugong, HAN Yunwu, Et al., Coordinated control strategy for the electro-hydraulic braking system of intelligent hybrid electric vehicles, Automotive Engineering, 33, 11, pp. 915-919, (2011)
12