Research Progress on Structure Design of Direct Halogen Perovskite X-ray Detectors

被引：0
|
作者：
Han J. [1 ]
Chai Y. [1 ]
Li X. [1 ]
机构：
[1] School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing
来源：
Faguang Xuebao/Chinese Journal of Luminescence | 2024年 / 45卷 / 01期
基金：
中国国家自然科学基金;
关键词：
device structure; electrode engineering; energy band engineering; hetero-junction; perovskite X-ray detector;
D O I：
10.37188/CJL.20230239
中图分类号：
学科分类号：
摘要：
X-ray detection technology has been widely used in medical diagnosis，security detection and scientific research. The direct X-ray detector has higher theoretical detection efficiency，space and energy resolution，and has been widely concerned at home and abroad. Perovskite is an ideal material for direct X-ray detectors because of its large attenuation coefficient，high bulk resistivity，suitable optical band gap and easy large area fabrication. With the increasing demand for detection performance，reasonable device structure design is particularly important. This review introduces the research progress of perovskite direct X-ray detectors from two perspectives：electrode engineering and energy band engineering. Finally，we summarize the research progress and present our views on its future development. We hope this review will provide reference and inspiration for researchers. © 2024 Chines Academy of Sciences. All rights reserved.
引用
收藏
相关论文
共 80 条
  • [31] ZHUANG R Z, WANG X J, MA W B, Et al., Highly sensitive X-ray detector made of layered perovskite-like（NH<sub>4</sub>）<sub>3</sub>Bi<sub>2</sub>I<sub>9</sub> single crystal with anisotropic response[J], Nat. Photonics, 13, 9, pp. 602-608, (2019)
  • [32] LIU J Y，, SHABBIR B, WANG C J，, Et al., Flexible，printable soft-X-ray detectors based on all-inorganic perovskite quantum dots[J], Adv. Mater, 31, 30, (2019)
  • [33] GUO J, XU Y D, YANG W H, Et al., High-stability flexible X-ray detectors based on lead-free halide perovskite C<sub>s</sub>2TeI<sub>6</sub> films[J], ACS Appl. Mater. Interfaces, 13, 20, pp. 23928-23935, (2021)
  • [34] YANG M M, LI A F，, HAO X, Et al., Highly sensitive X-ray detector made of large lead-free perovskite Cs<sub>3</sub>Bi<sub>2</sub>I<sub>9</sub> single crystals with anisotropic response[J], Adv. Opt. Mater, 11, 15, (2023)
  • [35] WEI S Y, TIE S, SHEN K, Et al., High-performance X-ray detector based on liquid diffused separation induced Cs<sub>3</sub>Bi<sub>2</sub>I<sub>9</sub> single crystal[J], Adv. Opt. Mater, 9, 22, (2021)
  • [36] XIA M L, YUAN J H, NIU G D, Et al., Unveiling the structural descriptor of A<sub>3</sub>B<sub>2</sub>X<sub>9</sub> perovskite derivatives toward X-ray detectors with low detection limit and high stability, Adv. Funct. Mater, 30, 24, (2020)
  • [37] LIN C H，, HU L, GUAN X W，, Et al., Electrode engineering in halide perovskite electronics：plenty of room at the interfaces[J], Adv. Mater, 34, 18, (2022)
  • [38] ZHANG B B, LIU X, XIAO B, Et al., High-performance X-ray detection based on one-dimensional inorganic halide perovskite CsPbI<sub>3</sub>[J], J. Phys. Chem. Lett, 11, 2, pp. 432-437, (2020)
  • [39] LEDEE F, CIAVATTI A, VERDI M, Et al., Ultra-stable and robust response to X-rays in 2D layered perovskite microcrystalline films directly deposited on flexible substrate[J], Adv. Opt. Mater, 10, 1, (2022)
  • [40] YE F, LIN H, WU H D, Et al., High-quality cuboid CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> single crystals for high performance X-ray and photon detectors, Adv. Funct. Mater, 29, 6, (2019)
12345678