Electric Field Driven Hybrid Micro and Nano 3D Printing of Low Frequency Transparent Electromagnetic Shielding Glass

被引：0

作者：

Tai Y. ^{[1
]}

Zhu X. ^{[1
]}

Li H. ^{[1
]}

Yu Z. ^{[1
]}

Zhang H. ^{[1
]}

Zhang F. ^{[1
]}

Zhang G. ^{[1
]}

Zhao J. ^{[1
]}

Huang Y. ^{[2
]}

Lan H. ^{[1
]}

机构：

[1] Shandong Engineering Research Center for Additive Manufacturing, Qingdao University of Technology, Qingdao

[2] China Building Materials Science Research Institute Co. Ltd., Beijing

来源：

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2024年 / 60卷 / 03期

关键词：

composite metal grids; electric field driven jetting; micro and nano 3D printing; micro plating; transparent electromagnetic shielding;

D O I：

10.3901/JME.2024.03.305

中图分类号：

学科分类号：

摘要：

In order to solve the challenging problem of large-area high-performance low-frequency transparent electromagnetic shielding glass that is difficult to be manufactured in batch at low cost, a new additive manufacturing method based on electric field-driven micro-jet and electroplating composite is proposed for the preparation of silver-nickel composite metal mesh low-frequency transparent electromagnetic shielding glass, and the basic principle and process flow of preparing silver-nickel composite metal mesh are described; the influence of the main process parameters (printing voltage, printing speed, printing air pressure, printing height, current density, plating time) on the electrical and optical properties of the prepared silver-nickel composite metal grids was revealed through experiments; and with the optimized process parameters, the silver-nickel composite metal grid transparent electromagnetic shielding glass with 10 μm line width, 0.76 Ω/sq square resistance, 90.2% grid transmittance, and shielding efficiency greater than 40 dB in the low frequency band (10 kHz-30 MHz) has been prepared, and the adhesion between the composite metal grid and the substrate is 5B. It provides a new solution for the mass production of high performance low frequency transparent electromagnetic shielding glass. © 2024 Chinese Mechanical Engineering Society. All rights reserved.

引用

页码：305 / 318

页数：13

共 28 条

[21] LIASHENKO I, ROSELL-LLOMPART J，, CABOT A., Ultrafast 3D printing with submicrometer features using electrostatic jet deflection[J], Nature communications, 11, 1, pp. 1-9, (2020)
[22] CAO Hui, ZHANG Guangming, YANG Jianjun, Et al., Electric-field-driven jet deposition micro-nano 3D printing based on a single-plate electrode[J], Chinese Science Bulletin, 66, 21, pp. 2745-2757, (2021)
[23] LIU Mingyang, QI Ximeng, ZHU Xiaoyang, Et al., Fabrication of embedded metal-mesh flexible transparent conductive film via electric-field-driven jet microscale 3D printing and roller-assisted thermal imprinting[J], Chinese Science Bulletin, 65, 12, pp. 1151-1162, (2020)
[24] XU Quan, LAN Hongbo, ZHAO Jiawei, Et al., Large-area transparent electrodes fabricated by combining the electric-field-driven fusion deposition direct writing and micro-transfer[J], Journal of Mechanical Engineering, 55, 23, pp. 216-225, (2019)
[25] ZHU X, LIU M, QI X, Et al., Templateless，plating-free fabrication of flexible transparent electrodes with embedded silver mesh by electric-field-driven microscale 3D printing and hybrid hot embossing[J], Advanced Materials, 33, (2021)
[26] ZHANG B, LEE H, BYUN D., Electrohydrodynamic jet printed 3D metallic grid：Toward high‐performance transparent electrodes[J], Advanced Engineering Materials, 22, 5, (2020)
[27] LAI Z, ZHAO T，, ZHU P，, Et al., Improved reliability of silver nanowire-based composites by electroplating：A theoretical and experimental study[J], ACS Applied Electronic Materials, 3, 8, pp. 3329-3337, (2021)
[28] SOERL S, BELLET D, COLEMAN J N., Relationship between material properties and transparent heater performance for both bulk-like and percolative nanostructured networks[J], ACS Nano, 8, 5, pp. 4805-4848, (2014)

← 1 2 3 →