Fluid flow in microchannel heat sinks for various flow configurations in tapered manifold arrangements

被引：0
|
作者：
Singh H. [1 ]
Samir S. [1 ]
Singh P. [1 ]
机构：
[1] Dept. of Mech. Engg., PEC University of Tech., Chandigarh
来源：
International Journal of Vehicle Structures and Systems | 2019年 / 11卷 / 03期
关键词：
Computational fluid dynamics; Flow configuration; Micro channel; Tapered manifold;
D O I：
10.4273/ijvss.11.3.24
中图分类号：
学科分类号：
摘要：
Micro channels face several types of thermal engineering challenges from different levels of heat generation. The reduction of the available surface area for sufficient heat removal becomes mandatory. If the working temperature of the component becomes very high in the absence of the sufficient heat removal, leads to a critical failure. So working fluid and flow configuration plays an important role. In the present work, CFD analysis of flow on U, P, S type micro channels heat sinks with tapered manifold arrangements is presented. At Reynolds number 705-1410 and with different heat inputs, the P type flow configuration is better than U-type and then followed by S-type flow configuration. © 2019. MechAero Foundation for Technical Research & Education Excellence.
引用
收藏
页码：343 / 345
页数：2
相关论文
共 50 条
  • [21] A COMPARATIVE NUMERICAL STUDY ON TWO-PHASE BOILING FLUID FLOW AND HEAT TRANSFER IN THE MICROCHANNEL HEAT SINK WITH DIFFERENT MANIFOLD ARRANGEMENTS
    Luo, Yang
    Zhang, Jingzhi
    Li, Wei
    PROCEEDINGS OF THE ASME 2020 FLUIDS ENGINEERING DIVISION SUMMER MEETING (FEDSM2020), VOL 3, 2020,
  • [22] HEAT TRANSFER AND FLOW CHARACTERISTICS OF FLOW BOILING IN MANIFOLD MICROCHANNEL
    Xu, Jinjin
    Zhang, Jingzhi
    Xin, Gongming
    Li, Wei
    PROCEEDINGS OF ASME 2024 7TH INTERNATIONAL CONFERENCE ON MICRO/NANOSCALE HEAT AND MASS TRANSFER, MNHMT 2024, 2024,
  • [23] Heat transfer and fluid flow analysis of microchannel heat sinks with periodic vertical porous ribs
    Lori, Mohammad Shamsoddini
    Vafai, Kambiz
    APPLIED THERMAL ENGINEERING, 2022, 205
  • [24] Three-dimensional numerical simulation of heat and fluid flow in noncircular microchannel heat sinks
    Chen, Yongping
    Zhang, Chengbin
    Shi, Mingheng
    Wu, Jiafeng
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2009, 36 (09) : 917 - 920
  • [25] Effects of different geometric structures on fluid flow and heat transfer performance in microchannel heat sinks
    Xia, G. D.
    Jiang, J.
    Wang, J.
    Zhai, Y. L.
    Ma, D. D.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 80 : 439 - 447
  • [26] Experimental study on flow boiling heat transfer in manifold microchannel heat sinks with different numbers and widths of manifolds
    Yu, Haoyuan
    Xu, Qiang
    Tang, Xiaoyu
    Pei, Chenyu
    Guo, Liejin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2025, 244
  • [27] Manifold microchannel heat sinks: Isothermal analysis
    Copeland, D
    Behnia, M
    Nakayama, W
    INTERSOCIETY CONFERENCE ON THERMAL PHENOMENA IN ELECTRONIC SYSTEMS - I-THERM V, 1996, : 251 - 257
  • [28] Topology Optimization of Manifold Microchannel Heat Sinks
    Zhou, Yuqing
    Nomura, Tsuyoshi
    Dede, Ercan M.
    PROCEEDINGS OF THE NINETEENTH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM 2020), 2020, : 740 - 746
  • [29] Manifold microchannel heat sinks: Isothermal analysis
    Copeland, D
    Behnia, M
    Nakayama, W
    IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY PART A, 1997, 20 (02): : 96 - 102
  • [30] A numerical study of fluid flow and heat transfer in different microchannel heat sinks for electronic chip cooling
    Xu, Shanglong
    Hu, Guangxin
    Qin, Jie
    Yang, Yue
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (04) : 1257 - 1263
12345