Effect of scanning characteristic parameters on surface morphology of selective laser melting 316L

[11] Hen Xuehui, Mu Weihao, Xu Xin, Et al., Numerical analysis of double track formation for selective laser melting of 316L stainless steel, Applied Physics A, 127, 8, pp. 1-13, (2021)

[12] Xiang Y, Zhang S, Wei Z, Et al., Forming and defect analysis for single track scanning in selective laser melting of Ti6Al4V[J], Applied Physics A, 124, 10, pp. 1-12, (2018)

[13] Cao L, Yuan X., Study on the numerical simulation of the SLM molten pool dynamic behavior of a nickel-based superalloy on the workpiece scale, Materials, 12, 14, (2019)

[14] Hu Guoming, Analysis and simulation of granular system by discrete element method using EDEM, (2010)

[15] Dai Donghua, Gu Dongdou, Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites[J], International Journal of Machine Tools and Manufacture, 100, pp. 14-24, (2016)

[16] Liang Zulei, Sun Zhonggang, Zhang Shaochi, Et al., Application and research status of numerical simulation in laser selective melting, Aeronautical Manufacturing Technology(Natural Science Edition), 61, 22, pp. 87-91, (2018)

[17] Qiu Yunji, Shen Mengqing, Niu Xiaofeng, Et al., Numerical simulation of the melting process of selective laser melting 316L powders, Special Casting & Nonferous Alloys(Natural Science Edition), 41, 9, pp. 1092-1096, (2021)

[18] Cao Zhiwei, Numerical simulation of single track formation and defects analysis in selective laser melting, (2019)

[19] Wang Wenhao, Liu Xinyu, Pan Lu, Effect of linear energy density on bubble-defect of 316L stainless steel by selective laser melting, Key Engineering Materials, 4834, pp. 32-36, (2019)

[20] Shi Xiaojie, Liu Xin, Ren Shuai, Et al., Selective laser melting fabricated tungsten with thin-walled structure: role of linear energy density on temperature evolution and manufacturing quality, International Journal of Material Forming, 15, 1, pp. 1-11, (2022)

[11] Hen Xuehui, Mu Weihao, Xu Xin, Et al., Numerical analysis of double track formation for selective laser melting of 316L stainless steel, Applied Physics A, 127, 8, pp. 1-13, (2021)

[12] Xiang Y, Zhang S, Wei Z, Et al., Forming and defect analysis for single track scanning in selective laser melting of Ti6Al4V[J], Applied Physics A, 124, 10, pp. 1-12, (2018)

[13] Cao L, Yuan X., Study on the numerical simulation of the SLM molten pool dynamic behavior of a nickel-based superalloy on the workpiece scale, Materials, 12, 14, (2019)

[14] Hu Guoming, Analysis and simulation of granular system by discrete element method using EDEM, (2010)

[15] Dai Donghua, Gu Dongdou, Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi10Mg composites[J], International Journal of Machine Tools and Manufacture, 100, pp. 14-24, (2016)

[16] Liang Zulei, Sun Zhonggang, Zhang Shaochi, Et al., Application and research status of numerical simulation in laser selective melting, Aeronautical Manufacturing Technology(Natural Science Edition), 61, 22, pp. 87-91, (2018)

[17] Qiu Yunji, Shen Mengqing, Niu Xiaofeng, Et al., Numerical simulation of the melting process of selective laser melting 316L powders, Special Casting & Nonferous Alloys(Natural Science Edition), 41, 9, pp. 1092-1096, (2021)

[18] Cao Zhiwei, Numerical simulation of single track formation and defects analysis in selective laser melting, (2019)

[19] Wang Wenhao, Liu Xinyu, Pan Lu, Effect of linear energy density on bubble-defect of 316L stainless steel by selective laser melting, Key Engineering Materials, 4834, pp. 32-36, (2019)

[20] Shi Xiaojie, Liu Xin, Ren Shuai, Et al., Selective laser melting fabricated tungsten with thin-walled structure: role of linear energy density on temperature evolution and manufacturing quality, International Journal of Material Forming, 15, 1, pp. 1-11, (2022)