Distributed power conditioning unit of large-scale space solar power station

In this paper, a multi-bus distributed Power Conditioning Unit (PCU) is proposed for the Space Solar Power Station with large scale photovoltaic (PV) array and power levels reaching MW level. In this unit, there are multiple independent PV arrays. In each PV array, there are multiple independent PV subarrays. In this paper, a V-P P droop control method with adaptive droop coefficient is proposed, which modifies the droop intercept based on the bus voltage deviation and the power per unit value of the PV array. This method ensures the accuracy of bus voltage and achieves proportional distribution of power between PV arrays based on the proposed topology structure in this paper. When the load changes or the output power of the PV array fluctuates, this method can ensure that power is distributed proportionally. The principle and control method of the proposed droop control method is analyzed in this paper. The effectiveness of the method is verified through MATLAB/Simulink simulation and experiment. Simulation and experimental results show that the proposed method can achieve power distributed proportionally when load changes and PV output power fluctuates, reduce bus voltage error caused by line impedance and differences in rated power of different PV arrays, and improve the performance of PV power generation system applied to space. (c) 2024 Production and hosting by Elsevier Ltd. on behalf of Chinese Society of Aeronautics and Astronautics. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).