Hydration and Mechanical Properties of Cement Kiln Dust-Blended Cement Composite

被引:0
|
作者
Lee, Woo-Seok [1 ]
Choi, Young-Cheol [1 ]
机构
[1] Gachon Univ, Dept Civil & Environm Engn, Seongnam 13120, South Korea
关键词
cement kiln dust; hydration; compressive strength; PORTLAND-CEMENT; FREE LIME; CONCRETE; SUBSTITUTION; STRENGTH; MORTAR; HEAT; CKD;
D O I
10.3390/ma17194841
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
This study aims to investigate the effects of cement kiln dust (CKD) on the hydration reactions and mechanical properties of cement, and to evaluate its potential for use as a supplementary cementitious material (SCM). The key variables are the CKD type and the replacement ratio. Cement paste and mortar specimens containing CKD were prepared to examine their effects on the cement hydration and mechanical properties. The effect on hydration was assessed using setting time measurements, heat of hydration tests, and thermogravimetric analyses (TG). In addition, compressive strength tests were conducted to evaluate the effect of CKD on the mechanical properties of the cement. The results indicated that CKD promoted early-age cement hydration and enhanced the early-age mechanical properties. However, owing to its lack of pozzolanic reactivity, it did not significantly affect long-term hydration. Given that the effects of CKD vary slightly depending on its chemical composition, careful consideration of CKD's properties suggests that its potential use as an SCM is promising.
引用
收藏
页数:16
相关论文
共 50 条
  • [21] Hydrothermal characteristics of blended cement pastes containing silica sand using cement kiln dust as an activator
    Abo-El-Enein, SA
    El-Hosiny, FI
    El-Shimy, E
    Osman, TA
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2002, 18 (05) : 474 - 478
  • [22] Hydration Products and Mechanical Properties of Steam Cured Lithium Slag Blended Cement
    Li B.
    You N.
    Zhu G.
    Huo B.
    Zhang Y.
    Cailiao Daobao/Materials Reports, 2019, 33 (12): : 4072 - 4077
  • [23] Macro- and nanomaterials for improvement of mechanical and physical properties of cement kiln dust-based composite materials
    Saleh, Hosam M.
    El-Saied, Fathy A.
    Salaheldin, Taher A.
    Hezo, Aya A.
    JOURNAL OF CLEANER PRODUCTION, 2018, 204 : 532 - 541
  • [24] Hydration, rheology, and strength of ordinary Portland cement (OPC)-cement kiln dust (CKD)-slag binders
    Wang, KJ
    Konsta-Gdoutos, MS
    Shah, SR
    ACI MATERIALS JOURNAL, 2002, 99 (02) : 173 - 179
  • [25] Hydration and Mechanical Properties of Blended Cement with Copper Slag Pretreated by Thermochemical Modification
    Wang, Daolin
    Zhang, Qinli
    Feng, Yan
    Chen, Qiusong
    Xiao, Chongchun
    Li, Hongpeng
    Xiang, Yujing
    Qi, Chongchong
    MATERIALS, 2022, 15 (10)
  • [26] A comparative study of the mechanical and thermal properties of EPDM rubber/cement kiln dust composite cured by ionizing radiation
    Khozemy, Ehab E.
    Nasef, Shaimaa M.
    Radi, H.
    INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2024, 29 (05) : 282 - 299
  • [27] Recycling of Cement Kiln Dust as a Raw Material for Cement
    Seo, Minhye
    Lee, Soo-Young
    Lee, Chul
    Cho, Sung-Su
    ENVIRONMENTS, 2019, 6 (10)
  • [28] Utilization of Cement Kiln Dust in Industry Cement Bricks
    Ali, Mahrous A. M.
    Yang, Hyung-Sik
    GEOSYSTEM ENGINEERING, 2011, 14 (01) : 29 - 34
  • [29] Characterization of the extruded polypropylene filled with cement kiln dust composite
    El-Rafey, Essam
    Sadik, Wagih A.
    Ramadan, Tawfik A.
    El-Farouk, Shimaa
    Syala, Eslam
    JOURNAL OF COMPOSITE MATERIALS, 2023, 57 (05) : 989 - 1000
  • [30] The influence of cement kiln by-pass dust addition on the properties of Portland and slag cement
    Tkaczewska, Ewelina
    Loj, Grzegorz
    Fratczak, Agata
    CEMENT WAPNO BETON, 2021, 26 (01): : 24 - 34