Phase classification and transient effects of the start-up process of multi-functional pump station in pump mode

In the context of achieving the goal of carbon neutrality, multi-functional pump stations (MFPS) have been greatly developed as a new energy system in recent years. The MFPS can operate in forward direction in pump mode to pump water and in turbine mode in reverse direction to generate electricity. At present, the instability of the MFPS during start-up process (SUP) in pump mode has become the key to restricting the operating life and further development of MFPS. In this paper, based on the motion characteristics of the pump and the cut-off facility (COF), the SUP of the MFPS in pump mode is clearly classified. In order to reveal the transient effect during the SUP, the steady-state full characteristic experiment (SFCE) of the pump was carried out. The occurrence phase of the transient effect during the SUP is analyzed, and the deviation between the steady-state external characteristics and the transient characteristics is revealed. In this study, the evaluation formula of the start-up completion degree (SUCD) of the MFPS in pump mode is proposed for the first time, and the evaluation and identification of the start-up progress at different phases are completed. The results show that the water flow in the system is in a reverse flow state in the Phase I. The SUCD of Phase I is 17 %. In the Phase II, The high-speed jet flow in the pump flows to the inlet of the guide vane (GV), which gradually changes the mainstream direction in the GV. A certain vortex structure can be observed at the exit of the flap gate (FG). The SUCD of Phase II is 61 %. In the Phase I and II, the dimensionless head of transient simulation is much larger than that of SFCE. In the Phase III, the flow state in the impeller will gradually stabilize. The transient effect disappears and the pressure fluctuation intensity decreases. The SUCD of Phase III is 93 %. In the Phase IV, the separation vortex that persists from Phase I-III at the tail of the GV blades disappears. The diversion capacity at the gate increases, and significant annular flow can be observed near the FG.