A new fault detection and relay coordination technique for low voltage DC microgrid

Integration of various distributed generation units in the DC distribution network creates an outsized impact on magnitude and direction of fault current. The specific behaviour of fault current during a short circuit fault demands quick and reliable detection and isolation of fault, which poses a significant challenge in developing an effective protection and coordination scheme for DC microgrids. In this regard, a new fault detection and relay coordination algorithm is proposed for a Low voltage DC (LVDC) microgrid, which utilizes inverse time relay characteristics based on variance of fault current. While the relay responds and picks up during both internal and external faults, its operation is automatically limited upon operation of the downstream circuit breaker without the need for any communication channel. The efficacy of the proposed strategy is evaluated by modelling a meshconnected DC microgrid network using PSCAD/EMTDC software. The protection coordination problem is developed as a constraint non-linear optimization problem to determine optimal relay settings. The proposed approach has been tested by simulating various types of faults at different fault locations and fault resistances along with various microgrid operating modes. The results suggest that the proposed strategy stands out by optimizing relay operating time and providing backup protection while upholding relay coordination. A comparative assessment of the proposed technique with existing ones proves its effectiveness in terms of swift relay tripping time, better immunity against noise, and independency against microgrid operating mode and topology.