Residual mechanical properties of corroded ultra-high-strength steels and weld metals

This paper presents an in-depth investigation into the residual mechanical properties of ultra-high-strength steels and weld metals after exposure to corrosive environment. The tensile specimens of weld metals were fabricated using ER100S-G, ER110S-G, ER120S-G feedstock wires by robotic gas metal arc welding, whilst ultra-high-strength steel tensile coupon specimens were machined from the Q890 and Q960 steel plates. The high-strength steel and weld metal tensile specimens were exposed to neutral salt spray accelerated corrosion conditions. Six exposure durations were designed to achieve different corrosion degrees of specimens. A total of 23 corroded ultra-high-strength steel tensile coupon specimens and 19 corroded high-strength weld metal specimens were included. The geometric profiles of corroded steel specimens were determined via non-contact 3D laser scanning. Monotonic tensile tests were conducted to determine the stress-strain responses and key mechanical properties of corroded steel and weld specimens. Mechanical properties deterioration of corroded ultra-high-strength steels and weld metals are reported and discussed. Prediction equations on the residual mechanical properties regarding the tensile loading capacity, yield stress and ultimate tensile stress of ultra-high-strength steels and weld metals after exposure to corrosive environment were established.