Influence of Welding Tool Material and Type of Joint on the Formability of Friction Stir Welded Tailored Blanks

被引：0
|
作者：
Bachmann, M. [1 ]
Goebel, R. [2 ]
Riedmueller, K. R. [1 ]
Liewald, M. [1 ]
机构：
[1] Univ Stuttgart, Inst Met Forming Technol, Stuttgart, Germany
[2] Univ Stuttgart, Mat Testing Inst, Stuttgart, Germany
来源：
LIGHT METALS 2024 | 2024年
关键词：
Formability; Friction stir welding; Bending test; Tailor welded blanks;
D O I：
10.1007/978-3-031-50308-5_40
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
Emerging process limits in sheet metal forming of tailored blanks are determined by the mechanical properties of semi-finished sheet materials to be joined and the type of weld seam. The weld seam properties in turn depend on the welding tool material and the utilized process parameters. In this study, tailored blanks were produced made of aluminum AA6016 (2 mm) and the steel grade DX54 (1 mm) as well as from AA6016 (2 mm) and HX380 (1 mm) using different welding tool materials such as steel and ceramics. The joint between both blanks was performed as a butt joint or combined lap-/butt-joint. The formability of the tailored blanks produced in this way was investigated using a three-point bending device. The tests carried out were evaluated with regard to the maximum bending force. Best results were obtained for tailored blanks produced with ceramic welding tools producing a combined lap-/butt-joint.
引用
收藏
页码：306 / 312
页数：7
相关论文
共 50 条
  • [41] Enhancing Formability of AA2219 Aluminum Alloy Friction Stir Welded Blanks with Preheating Treatment
    Wei Liu
    Wangjun Cheng
    Yongchao Xu
    Shijian Yuan
    Journal of Materials Engineering and Performance, 2018, 27 : 4819 - 4828
  • [42] The effect of post-weld heat treatment on the formability of aluminum to steel friction stir welded blanks
    Muhamad Zulkhairi Rizlan
    Ahmad Baharuddin Abdullah
    Zuhailawati Hussain
    International Journal of Material Forming, 2025, 18 (2)
  • [43] Mechanical and Formability Evaluation of ST14 Alloys Welded by Friction Stir Welding
    Afshari, Mahmoud
    Fakhralmobasheri, Nima
    Samadi, Mohammad Reza
    Alavi, Amirhossein
    Foroushani, Hossein Norozi
    SHOCK AND VIBRATION, 2021, 2021
  • [44] Weld zone representation during the formability prediction of friction stir welded blanks with similar thickness sheets
    Ramulu, P. J.
    Narayanan, R. Ganesh
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2011, 46 (06): : 456 - 477
  • [45] Lap Welded Joint of Aluminum and Titanium Alloy by Friction Stir Welding
    Amirov, A. I.
    Beloborodov, V. A.
    Ivanov, A. N.
    Zhukov, L. L.
    PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES, 2018, 2051
  • [46] Friction Stir Welding of Aluminum Alloys with Additional Cooling of a Welded Joint
    V. V. Ovchinnikov
    A. M. Drits
    Russian Metallurgy (Metally), 2021, 2021 : 1488 - 1497
  • [47] Friction Stir Welding of Aluminum Alloys with Additional Cooling of a Welded Joint
    Ovchinnikov, V. V.
    Drits, A. M.
    RUSSIAN METALLURGY, 2021, 2021 (12): : 1488 - 1497
  • [48] FRACTURE MECHANISM OF ALUMINIUM FRICTION STIR WELDED BLANKS
    Zadpoor, Amir Abbas
    Sinke, Jos
    Benedictus, Rinze
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 319 - 322
  • [49] Fracture mechanism of aluminium friction stir welded blanks
    Amir Abbas Zadpoor
    Jos Sinke
    Rinze Benedictus
    International Journal of Material Forming, 2009, 2
  • [50] Effect of friction stir welding parameters on the deep drawing of tailor-welded blanks (TWBs)
    Kamalvand, Ezatolah
    Jabbari, Ali
    Sheykholeslami, Mohammad Reza
    Mazdak, Siamak
    Beygi, Reza
    Mohammadi, Sajad
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 33 : 91 - 99
12345