Influence of Laser Scanning Speed on Wear and Corrosion Resistance of Aluminum-Nickel Coating on Magnesium Alloy

被引：0
|
作者：
Gao, Yali [1 ]
Jiang, Shan [1 ]
Lu, Pengyong [1 ]
Bai, Sicheng [1 ]
Zhang, Dongdong [1 ]
Jie, Meng [2 ]
机构：
[1] Northeast Elect Power Univ, Dept Mech Engn, 169 Changchun Rd, Jilin 132012, Peoples R China
[2] Jilin Inst Chem Technol, Sch Mech Elect Engn, Jilin 132022, Peoples R China
来源：
PROCESSES | 2024年 / 12卷 / 08期
关键词：
laser cladding; Mg alloy; Al-Ni coating; wear resistance; corrosion resistance; SURFACE-LAYERS; BEHAVIOR; MICROSTRUCTURE; CLAD; AZ80;
D O I：
10.3390/pr12081689
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
To improve the wear and corrosion resistance, Al-Ni coating was prepared on Mg alloy by laser cladding, and the influence of the laser scanning speed on the microstructure, wear and corrosion resistance of the coatings was systematically analyzed. The results showed that the coatings with different scanning speeds were composed of Al3Ni2, Mg17Al12 and Mg2Al3 phases. The coatings presented fine needle-like grains. Under different scanning speeds, the microhardness of the coatings was 3.3-4.8 times that of the substrate, and the wear volume of the coatings was decreased by 40.08-51.38%. The coating with a laser scanning speed of 600 mm/min had the highest hardness, the best wear and corrosion resistance.
引用
收藏
页数：15
相关论文
共 50 条
  • [41] Heat Treatment of Thermal Spray Duplex Coating System of Aluminum-Nickel Chromium Alloy on Carbon Steel
    Cuong Quoc Ly
    Quy Thu Le
    Tuan Van Nguyen
    Hang Thi To Phung
    Dien The Ngo
    Journal of Thermal Spray Technology, 2013, 22 : 1383 - 1387
  • [42] Impurity control and corrosion resistance of magnesium-aluminum alloy
    Liu, Ming
    Song, Guang-Ling
    CORROSION SCIENCE, 2013, 77 : 143 - 150
  • [43] Effect of laser fusing on hot corrosion resistance of nickel based self fluxing alloy coating
    Li, Yu
    Nishio, Kazumasa
    Katoh, Mitsuaki
    Yamaguchi, Tomiko
    Okamine, Shinji
    HIGH-TEMPERATURE OXIDATION AND CORROSION 2005, 2006, 522-523 : 385 - 392
  • [44] Microstructure and corrosion resistance of AlCrFeCoNiCu high-entropy coating by laser deposition on an aluminum alloy
    Li Yan-zhou
    Shi Yan
    CHINESE OPTICS, 2019, 12 (02): : 344 - 354
  • [45] Effect of laser scanning speed on the surface characteristics and wear resistance of TiZrAlV alloy via laser gas nitriding
    Feng, Zhihao
    Wei, Kaimin
    Wang, Tianyu
    Feng, Qian
    Wang, Sijie
    Jiao, Lishi
    Ma, Jing
    Meng, Dezhong
    Li, Jianhui
    SURFACE & COATINGS TECHNOLOGY, 2025, 500
  • [46] Microhardness, wear resistance, and corrosion resistance of AlxCrFeCoNiCu high-entropy alloy coatings on aluminum by laser cladding
    Li, Yanzhou
    Shi, Yan
    OPTICS AND LASER TECHNOLOGY, 2021, 134 (134):
  • [47] The influence of hexamethylenetetramine on the structure and corrosion resistance of phosphate coating on AZ31 magnesium alloy
    Li, Jiansan
    Li, Yali
    Chen, Yanqin
    Sun, Jiawei
    Wang, Chunxiao
    Zheng, Yingcai
    Zhong, Huiting
    ANTI-CORROSION METHODS AND MATERIALS, 2016, 63 (03) : 161 - 165
  • [48] Effect of alloy cations on corrosion resistance of LDH/MAO coating on magnesium alloy
    Chen, Junfeng
    Lin, Wenxin
    Liang, Shiyan
    Zou, Linchi
    Wang, Chen
    Wang, Binshu
    Yan, Mufu
    Cui, Xiping
    APPLIED SURFACE SCIENCE, 2019, 463 : 535 - 544
  • [49] Effect of Electromagnetic Field Assistance on the Wear and Corrosion Resistance of Nickel-Based Coating by Laser Cladding
    Zhan, Dianxian
    Jiang, Dezhi
    Tong, Yonggang
    Zhang, Mingjun
    Zhang, Jian
    Hu, Hongwei
    Zhang, Zhenlin
    Wang, Kaiming
    METALS, 2024, 14 (09)
  • [50] Corrosion Resistance of Aluminum-Magnesium Alloy AA5083 Welded Joint after High-Speed Laser Welding
    Vorontsov, A. V.
    PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
12345