Finite element analysis on temperature field and stress distribution of thermal barrier coatings by laser modification and CMAS corrosion

Laser glazing to produce a modified layer on the surface of thermal barrier coatings (TBCs) is a promising method to alleviate calcium-magnesium-alumina-silicate (CMAS) attacks to coatings. In this study, finite element analysis is carried out to investigate the temperature field and stress distribution of TBCs after the laser glazing process and the modified TBCs after CMAS corrosion. Results revealed that along the direction of laser scanning, the principal stress was in a tensile state, which increased along the direction of the laser spot movement; while perpendicular to the laser scanning direction, the maximum principal stress appeared at the interface between the glazed layer and the unmodified coating, where could be a potential danger zone for crack initiation and coating spallation. For the modified TBCs with CMAS attack, in regions that are located in the range of 0-6 mm along the radial direction, the radial stress and maximum principal stress were high (similar to 1094 similar to 1094 MPa), and the coating edge had complex shear stress state; as a result, these areas were easy to crack. (c) 2022 The Authors. Published by Elsevier B.V. on behalf of Institute of Metal Research, Chinese Academy of Sciences. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ )