A Single-Chip AlScN PMUTs-on-CMOS Hydrophone

This work presents a minute single-chip piezoelectric micromachined ultrasonic transducers (PMUTs)-on-complementary metal-oxide-semiconductor (CMOS)-based hydrophone with high receiving sensitivities and low noise. The system is based on three different Sc9.5% Al90.5% N PMUTs geometries: (a) square with an 80 mu m side, (b) rectangular with a dimension of 60 x 40 mu m, and (c) annular with an outer diameter of 80 mu m which allows to carry out acoustic measurements at very close distances from the transducer under test. Each device is monolithically integrated with a CMOS low noise amplifier (LNA) amplifier with a gain of 25 dB. The first hydrophone prototype was validated in water where two commercial hydrophones from ONDA (HGL-0085 and HNC-0200) were used as references. The experimental results give mean receiving sensitivities of -234 dB re 1 V/mu Pa (equivalent to 1.9 V/MPa), -234.6 dB re 1 V/mu Pa (equivalent to 1.86 V/MPa), and -238.3 dB re 1 V/mu Pa (equivalent to 1.22 V/MPa) for (a)-(c), respectively. These results demonstrate the high performance of the presented PMUTs-on-CMOS to be used in a miniaturized hydrophone for characterizing high-frequency ultrasound transducers.