Research on the Influence of Temperature on the Assessment of Coal and Gas Outburst Dynamic Risk in Deep Mining

To ensure the sustainable development of energy supply, there is a continuous increase in demand for deep coal mining, making safe and efficient extraction a crucial area of research. However, with the increasing depth, rising ground temperatures pose new challenges for safe and sustainable mining operations. Among these challenges, coal and gas outburst dynamic hazards stand out as significant issues. Therefore, it is necessary to assess the impact of temperature variations on coal and gas outburst disaster prevention and control. To investigate this effect, we conducted an analysis based on outburst-triggering mechanisms and adsorption-desorption processes. Temperature was considered as the primary controlled variable, while gas expansion energy served as the criterion for assessing outburst hazards. Kilometer-deep coal samples were selected for measurement, focusing on indicators such as Langmuir adsorption constants (a,b), gas content (Q), gas pressure (P) and drilling cutting desorption indices (K-1, Delta h(2)). The results indicate that, under the same gas pressure, there is a slight decreasing trend in gas expansion energy with increasing temperature, although the overall change is minimal. Hence, the sole influence of temperature on the gas's ability to perform work during outbursts is limited. Temperature exerts varying degrees of influence on gas parameters such as gas content and drill cutting desorption indices. The fluctuation amplitudes of these indicators range from large to small in the following order: Delta h(2) > Delta P > Q > K-1 > P. Additionally, their correlation with gas expansion energy decreases in the following order: P > Q > Delta h(2) > K-1 > Delta P. Thus, the influence of temperature on the indicators used in various prediction methods exhibits inconsistency, emphasizing the importance of considering temperature effects on predicted values. Gas pressure emerges as the optimal indicator for outburst determination, while gas content and drill cutting desorption indices are preferable as predictive indicators. These results will provide valuable references for the sustainable and safe development, risk assessment and prediction of deep coal mining.