A case study of structural optimization for additive manufacturing

被引：0
|
作者：
Hajnys, J. [1 ]
Pagac, M. [1 ]
Mesicek, J. [1 ]
Krpec, P. [2 ]
机构：
[1] VSB Tech Univ Ostrava, Fac Mech Engn, Dept Machining Assembly & Engn Metrol, Ostrava, Czech Republic
[2] V NASS, Ostrava, Czech Republic
来源：
CURRENT PERSPECTIVES AND NEW DIRECTIONS IN MECHANICS, MODELLING AND DESIGN OF STRUCTURAL SYSTEMS | 2022年
关键词：
D O I：
10.1201/9781003348443-71
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The article deals with structural optimization and their simulation. The paper is divided into two sections, where the first is a simplified review of the current state of structural optimization with a focus on topological optimization and lattice structures. In the second part, a simulation of a selected component used in the automotive industry is performed. It is clear from the results that it is appropriate to use lattice structure to reduce weight and to use topological optimization to improve stiffness. The results are discussed and summarized in table.
引用
收藏
页码：432 / 436
页数：5
相关论文
共 50 条
  • [1] A case study of structural optimization for additive manufacturing
    Hajnys, J.
    Pagac, M.
    Mesicek, J.
    Krpec, P.
    CURRENT PERSPECTIVES AND NEW DIRECTIONS IN MECHANICS, MODELLING AND DESIGN OF STRUCTURAL SYSTEMS, 2022, : 151 - 152
  • [2] Combining structural topology optimization and big area additive manufacturing - A case study
    Nikolov, N.
    Fletcher, K.
    STRUCTURES AND ARCHITECTURE: BEYOND THEIR LIMITS, 2016, : 982 - 989
  • [3] Structural Optimization and Additive Manufacturing
    Ibabe, Julen
    Jokinen, Antero
    Larkiola, Jari
    Arruabarrena, Gurutze
    MATERIAL FORMING ESAFORM 2014, 2014, 611-612 : 811 - 817
  • [4] Structural Optimization in Lightweight Design for Additive Manufacturing
    Junk, Stefan
    Klerch, Benjamin
    Hochberg, Ulrich
    29TH CIRP DESIGN CONFERENCE 2019, 2019, 84 : 277 - 282
  • [5] Structural design optimization of knee replacement implants for Additive Manufacturing
    Peto, Marinela
    Ramirez-Cedillo, Erick
    Hernandez, Adriana
    Siller, Hector R.
    47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47), 2019, 34 : 574 - 583
  • [6] A design framework to replace conventional manufacturing processes with additive manufacturing for structural components: A formula student case study
    Bikas, Harry
    Stavridis, John
    Stavropoulos, Panagiotis
    Chryssolouris, George
    FACTORIES OF THE FUTURE IN THE DIGITAL ENVIRONMENT, 2016, 57 : 710 - 715
  • [7] Additive manufacturing in prosthesis development - a case study
    Maji, Palash Kumar
    Banerjee, Amit Jyoti
    Banerjee, Partha Sarathi
    Karmakar, Sankar
    RAPID PROTOTYPING JOURNAL, 2014, 20 (06) : 480 - 489
  • [8] Case Study: Additive Manufacturing of Aerospace Brackets
    Dehoff, Ryan
    Duty, Chad
    Peter, William
    Yamamoto, Yukinori
    Chen, Wei
    Blue, Craig
    Tallman, Cory
    ADVANCED MATERIALS & PROCESSES, 2013, 171 (03): : 19 - 22
  • [9] Case study: Additive manufacturing of aerospace brackets
    Dehoff, Ryan
    Duty, Chad
    Peter, William
    Yamamoto, Yukinori
    Chen, Wei
    Blue, Craig
    Tallman, Cory
    Dehoff, R. (dehoffrr@ornl.gov), 2013, ASM International (171): : 19 - 22
  • [10] The Impact of Additive Manufacturing Constraints and Design Objectives on Structural Topology Optimization
    Dangal, Babin
    Jung, Sangjin
    APPLIED SCIENCES-BASEL, 2023, 13 (18):
12345