Customized Li+ Solvation Sheath at the Poly(ethylene oxide)-Based Electrolyte/Ultrahigh-Nickel Cathode Interface toward Room-Temperature Solid-State Lithium Batteries

The matching of poly(ethylene oxide) (PEO)-based electrolytes with ultrahigh-nickel cathode materials is crucial for designing new-generation high-energy-density solid-state lithium metal batteries (SLMBs), but it is limited by serious interfacial side reactions between PEO and ultrahigh-nickel materials. Here, a high-concentration electrolyte (HCE) interface with a customized Li+ solvation sheath is constructed between the cathode and the electrolyte. It induces the formation of an anion-regulated robust cathode/electrolyte interface (CEI), reduces the unstable free-state solvent, and finally achieves the compatibility of PEO-based electrolytes with ultrahigh-nickel cathode materials. Meanwhile, the corrosion of the Al current collector caused by lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) ions is prevented by lithium difluoro(oxalato)borate (LiDFOB) ions. The synergistic effect of the double lithium salt is achieved by a well-tailored ratio of TFSI- and DFOB- in the first solvation sheath of Li+. Compared with reported PEO-based SLMBs matched with ultrahigh-nickel (Ni >= 90%) cathodes, the SLMB in this work delivers a high discharge specific capacity of 216.4 mAh g(-1) (0.1C) even at room temperature. This work points out a direction to optimize the cathode/electrolyte interface.